Source for Plastic Wraps / Straps for Securing Harness Along inner Fenders? (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

EWheeler

4 Cruisers, No Garage !
GOLD Star
Joined
Apr 5, 2008
Threads
110
Messages
2,939
Location
Menifee, CA
Is there a source or good alternative (please do not answer with zip ties) for the plastic wraps that were used to secure the factory harness along the inner fenders? It was dark last night and didn't get a good pic. Toyota Matt and City Racer show nothing on the websites. Scoured over the Toyota Electronic Parts Catalog diagrams and could not find anything. Looks like I need 4 of them for my '71 to get the harness back where it belongs.
 
I got some from SOR.
I always forget about them because I hate their handling fees. Thanks. I'll bite the bullet and place the order from them.
 
Toyota still sells them. I believe I can get the part number tonight.

They are still available from Toyota. I bought some last year. 90463-10521


Sweet. Thanks for that! Google searching the part number brought up some good info with other variations and part number.

I'm looking for the blue ones.

Here are some links to good info with pics and part numbers:





Another good source of info with a chart and part number for misc plastic toyota clips and bits:

 
I used to get Christmas tree locking wire straps from cars at the junkyard, but I’ve been enjoying the updated version of this idea for a while. 1/4” hole, insert push fitting, and it leaves an anchor point to attach different straps and ties. I usually zip tie it so if I have to open it back up, I just clip the tie and rezip after. And I have an existing anchor point if I add more stuff later. I’ve found it to work very well for my beetle, a couple of trucks, utility and gooseneck trailers. I just ordered a bag of them for the 40 to do the new harness. Looks good, Low profile, lightweight, inexpensive, lasts a long time, cheap to replace.

i don’t know how to copy a link from my Amazon app, so here is a screenshot of the bag I just ordered.
44D5A600-DC33-47A8-B0A0-89C55C985EC0.png
 
Is there a source or good alternative (please do not answer with zip ties) for the plastic wraps that were used to secure the factory harness along the inner fenders? It was dark last night and didn't get a good pic. Toyota Matt and City Racer show nothing on the websites. Scoured over the Toyota Electronic Parts Catalog diagrams and could not find anything. Looks like I need 4 of them for my '71 to get the harness back where it belongs.


Evan

are these the Unicorns u seek ? :popcorn:

if so i have 11 of them and there yours .........

no cost involved to be clear , they where a mistake order on my part while back , i have shipping covered as well ..

u can simply have them ALL


Please pM me if you need this part # ?

thanks



E7F45AB2-0785-4D36-939A-E4403C92D4BA.jpeg
2C3A1075-88C2-4AE2-A136-FA1F57E0A785.jpeg
B22CBD2B-5B6E-4E81-AD95-E80296106B00.jpeg
8B538135-A7E1-42DE-AFA5-82CA9F81CA40.jpeg
F6A1D247-CD1C-4EFE-AB03-4E8EC470158F.jpeg
 
Last edited:
I guess since we on the topic here

Some Easter 🐣 eggs can slip out

- my current yellow chromate plated spring tension clamps kit getting a update and upgrade to a full ON 200pcs kit more size spec variations and well tons more of them

- I tripped over This I call
Them “ hair pin “ spring tension clamps but I know that’s not JiS correct ?

anyone know the proper jis terminology for these small but indeed used thin guages micro clamps with butterfly 🦋 wings to hand 🤚 compress

anyway both will be online very very soon






5EC9C9EF-3937-4F75-95C8-E591D319441A.jpeg
D47D530F-0300-4A11-B4F5-813512317C30.jpeg
F31121ED-B3D2-4C6F-A4B4-5D353931208F.jpeg
18E2E68D-4981-4424-85E2-D85619A684CB.jpeg
B1B78D29-9C2C-4A42-8062-7EEC2582835B.jpeg
637C7882-A74E-4E93-A558-3CFA46B3C990.jpeg
B750FC31-6571-4804-A802-B671AB0F7033.jpeg
 
Last edited:
Now into new and uncharted territory realated to Evans tech topic generalized :

utility retainers for all occasions…

All OEM toyota many uses I can dream of ..

- dark ones upper lh corner bags of 10pcs
Single brake lines tubing 8mm bolt holes is rare in my experience ?

- upper rh side larger tubing or small sub harness,s
looms or tubes there both rubber vulcanized to prevent abrasions

larger ones do to a few factors maybe single available or 2 packs / twin packs ?

not sure yet ?

big brown ones middle rh side and twin tubes I think 8mm fuel lines for sure …

you know suction and return line running parralll
Safe to clamp to chassis in tandom

or

clamp 2 soft lines like @cruiserboy14 had going on today

no flapping in the AZ wind no rubbing and chafing other parts safety items if u will neatness is safe too …

little bags of 10pcs bottom are a flexible J clamp that can hold a loom of wires or a single brake line or tube fuel or the like

6mm hole fastenrs size spec.

I have no clue what there actually for but it’s a solid part # and also a price point where a 10pack is well gimmi more of them possible


CF97D478-64BC-493B-B04B-21C4D445F81E.jpeg
48C65566-ADC9-4984-9C88-FD98B4ED52C5.jpeg
92788DA3-1E13-4C8C-AA19-4AD774759F4A.jpeg
13B6D5F2-E410-4DE9-A047-DAC21EE3DAB0.jpeg
B6DD4CC4-1377-45DC-A0C1-AAE18672142A.jpeg
F8264FFF-C20F-42AC-9DB7-F614290F9011.jpeg
87F5E052-9A0C-4611-97F3-79FDE094C70E.jpeg
B0999059-6B3C-42F0-9831-44532F352CD4.jpeg
 
Last edited:
Ok

im looking for some feedback here on the below please

these are metric zinc plated generic clamps I got a nice samplers platter

dig all the various profiles and sizes specs

I can only dream big dreams on a end use growing up

I needed all of these at one time or another ?

key point ok , not oem toyota

but metric indeed

and well they look oem toyota or at least Japanese’s mounting hardware to me

problem solvers !

only con. No rubber parts in tips ?

However not all land cruiser clamps had vucinized rubber dipped ends either to be clear

ps lines metal pressure feeds

Metal fuel hard lines never did either

I see these running all over the front face and front sides of all F series and 2F and 3F too for a double or single return lines or pressure feed fuel

lines only

all have 8mm bolts holes for mounting

And the price point is well better then you can think …

Thoughts ?

Holiday trigger pulling is happening right now du to covid

I am hording all nice stuff from a good past and introducing a wild array of off the cuff gut instinct stuff too

also

phasing out stuff like air filters that are hard to ship due to size etc …

all air filters are $8 or less

only keeping the oval DeNso japan 2F one because a OEM toyota same exact part different color box now will exceed 47$ msrp

That’s insane and shaft by toyota in my face anyway !


76ADCBF8-5227-483F-AF8D-2AD4ABE7DADF.jpeg
A73931CA-CB05-48CF-A643-41BC9442A133.jpeg
75D431E7-7A36-4B09-84CA-C2A65EB5146A.jpeg
AFD62481-3B0C-4816-AF0F-DB20A3F57FDE.jpeg
0989C43C-C060-4C7B-A31F-69A1AE6EA346.jpeg
 
Last edited:
That is a wonderful collection, seems like it might be worthy of a new thread. A lot of people might not see them in here.


well it was a shoot from the hip moment , there is tons tons more in unpacked boxes still to sift thu ......



ill make one later

thanks for the suggestion ! :)



my main goal was Helping @EWheeler with his soft white nylon sub harness retainers things clamps ...........

i think i have what he needs i hope ?
 
Evan

are these the Unicorns u seek ? :popcorn:

if so i have 11 of them and there yours .........

no cost involved to be clear , they where a mistake order on my part while back , i have shipping covered as well ..

u can simply have them ALL


Please pM me if you need this part # ?

thanks



View attachment 2784036View attachment 2784037View attachment 2784038View attachment 2784039View attachment 2784040
@ToyotaMatt

Matt, thank you for the offer!! The ones i am after are the darker blue or black ones. I ordered both kinds on Friday, so I am all set.
 
@ToyotaMatt

Matt, thank you for the offer!! The ones i am after are the darker blue or black ones. I ordered both kinds on Friday, so I am all set.


i have concluded ALL ones besides these white one i show above and the part # are all disc. / NLA ?


i may be wrong , but i think im correct as least in part or whole

i unicorn hunter hard a while back for 100packs of them , nottta...............
 

Users who are viewing this thread

Back
Top Bottom