son of a...! vices

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 30, 2003
Threads
647
Messages
16,635
Location
windy wyoming
anybody got one's they really think are woth the money (preferably one that a poor person can afford)? i was cranking mine down to try to get a tie rod end out and ...SNAP!!! son of a.....
P9050001.webp
P9050002.webp
 
Wow-I think I have that exact vice. Harbor freight, right? I'm building a new work bench, maybe I'll upgrade. Any suggestions?
 
might have to try that crapsman one...is close to my price range. i do have to admit that i got my money's worth out of the h f one before i broke it...i've used it hard fpr the last three or four years.
 
the $30 dollar one I got from HD has been holding up ok. The handle looks like a pretzel though, and when I get to crankin I'm worried that I'm gonna strip the weenie threads on it. It's ok for small jobs, like holding the garden hose fitting from spinning whil trying to remove my cross threaded sprayer. :D

Nah, it works ok.
 
Record vices (made in UK) used to be the standard here but I never see one on ebay. Were they not popular in the US? For some reason they are not being imported to Canada anymore and I am at a loss as to what to buy as well. All of the Chinese vices are crap. I've bought and wrecked two 8" ones from different manufacturers in the last three years while my ten year old Record vice works just like new. (and like all the 25 YO ones I've seen)

Just did a little searching and they seem to be owned by American Tool AKA Irwin now.
 
lowenbrau said:
Record vices (made in UK) used to be the standard here but I never see one on ebay. Were they not popular in the US?
I've seen and used woodworking vices by Record here in the US, but have never seen a big heavy-duty one like this from Record. If they make them, I'm sure they're good (and expensive).

I broke a similar Chinese vice in the same exact way/place a while back.
 
Nuclearlemon, surprised you don't have an old Wilton or Reed from a garage that closed or something. About 2 yrs ago I went on a scavenge and bought like 6 Wiltons and Reeds, in various sizes for a total of about $100 from a garage that was closing. Heavy duty and you can really beat on them.
 
I have a heavy English RECORD vise. Only about 50 years old. Very well made and tough. Check used sources for a better tool than you can find new.

M
 
eshelbyk said:
Bought a 5 inch Wilton from Home Depot a while back. A few club members have 'em and haven't had any complaints.

huge HD link below-

http://www.homedepot.com/prel80/HDU...ID=cccfaddfimmjljmcgelceffdfgidgmm.0&MID=9876

wilton_vice.jpg

That is exactly what I ave and it has held up very well. Bailey broke the side rotational adjustement set screw and he about broke the lower L/R rotational set screw. I guess the vise is good but I need to egt another Bailey!

If Bailey cant break it it must be OK.

Honestly, I did not expect this to last as long as it has. For $60 it is a deal.
 
Wilton and Columbian are good USA made brands. Craftsman resells some of the Wilton's but they are Chinese made whereas many of the Wilton brand are made in USA. I don't know much about the quality of those.

FYI, Wilton now owns Columbian but if you can find an older Columbian you may be able to pick it up cheap. I found a 5" at a garage sale for $25. The older Wilton's still get a good price in used tool stores.

I also had one of those HF pieces of crap and it broke just like that one. Get a good vice even if you have to up the budget.

-B-
 
Go to your local flea market. There are always tons of nice used vices, large and made in the old days with real metal from the US, and they are CHEAP! I've got a monster that takes 2 people to move and made the Tacoma squat when I loaded it. It dented the bed of the truck when we set it down. :D That one set me back a whopping $50.
 
our local flea market's a joke, been watching for shops closing up for a while, but can never seem to make it to them when they do...someone found a used one local for %=$5...hopefully i'll get that for now. i only have about $100-$150/mo to blow, with a house that needs work and five cruisers... :frown:
 
Back
Top Bottom