Wanted SoCal: 71 FJ40 E brake switch (1 Viewer)

[RodrigzCrzr]

Location

United States

Hello
looking for a 71 FJ40 E brake indicator switch.
let me know what you may have
thanks
Jorge

 

[Spike Strip]

Switch, Brake Light, 71-80 FJ40 45 55, HJ BJ, OEM

OEM Switch, Brake Light 7/70-7/80 Toyota Land Cruiser FJ40, FJ45, FJ55, HJ45, BJ40 For Tandem Master Cylinder Excludes 4/79-7/80 Australia Spec OEM: 84340-30022, 84340-30023, 84340-12012...

www.fjparts.com

 

[RodrigzCrzr]

Switch, Brake Light, 71-80 FJ40 45 55, HJ BJ, OEM

OEM Switch, Brake Light 7/70-7/80 Toyota Land Cruiser FJ40, FJ45, FJ55, HJ45, BJ40 For Tandem Master Cylinder Excludes 4/79-7/80 Australia Spec OEM: 84340-30022, 84340-30023, 84340-12012...

www.fjparts.com

Thank You

 

[ToyotaMatt]

Hello
looking for a 71 FJ40 E brake indicator switch.
let me know what you may have
thanks
Jorge

i have E-BRAKE Switches Jorge ,

these mount to the T handle and activate the DASH mountied indicator lamp as you request above

if u need one with bullet connectors or a mating modern spade connector housing for the ones i have i WILL supply those parts at NO extra cost to you of course




see my link below :

NOS OEM Toyota land cruiser RED PARKING Brake Indicator Light in dash PIN switch 1973-1990 - VintageTEqParts.com

NOS OEM Toyota land cruiser RED PARKING Brake Indicator Light in dash PIN switch 1973-1990

vintageteqparts.com

 

[RodrigzCrzr]

Thanks Matt !

 

[Spike Strip]

@RodrigzCrzr - Does your switch have bullet connectors? Switch is the same, just connectors are different.

Easy enough to swap ... Btw, the 4wd switch you asked for in another post is available from Toyota and probably Matt has it, too.

 

[RodrigzCrzr]

@RodrigzCrzr - Does your switch have bullet connectors? Switch is the same, just connectors are different.

Easy enough to swap ... Btw, the 4wd switch you asked for in another post is available from Toyota and probably Matt has it, too.

Yeah I spoke to Matt. And I have one coming from him.
I found the problem with the 4wd switch. It needed a detent ball installed I had one in my stash but need confirmation it was the same one and Matt did confirm it would work.
I posted a video and the part number.
Thanks so much