SOA Rear Axle Turn? (1 Viewer)

[YODA 88 62]

SOA:stock springs
C&T by proffits
FJ62

How many degrees should i turn the rear axle?

Consider the stock spring perch 0 degrees.

Thanks
Charles

 

[RredFJ40]

Are you doing a double carden joint in back? You'd only need to rotate the rear axle to point at the T/C if you had a double carden. If not then you need to keep the pinion angle the same. HTH

 

[YODA 88 62]

i would like to run the stock drive shaft

 

[VETTE60]

then the angles need to match eachother, or else you get road vibe!!!

 

[Rig of Mortis]

almost straight on

I always wanted it to be straight from the transfer case to the pumpkin, however, I made my driveline angle just below being straight as for when I'm on the gas pedal and under torque load, I have a straight driveline.

I thought it was wierd at first but I got used to it... and I have no driveline vibration as it's a very subtle angle.

I've never measured for the angle, I just based it visually.

 

[RredFJ40]

read this and learn:

http://www.pirate4x4.com/tech/billavista/PR-shaft/index.html