Guru's (@FJ60Cam @wngrog @GA Architect and others!),
I'm trying to resolve a couple slight annoyances that I'm having with my Sniper.
1) When the 40 is cold or warm and I decelerate to a stop, the AFR jumps up to 18-20 while the idle goes to about 75 less than target. IAC is zero during that time. It doesn't stall but sure feels close before it catches itself
-I have adjusted the idle ramp down delay to hang slightly longer with no change. I also changed the cam setting to mild. Shots in the dark if nothing else per Cameron's guidance to another post.
2) During the initial start I have to crank it for about 8 seconds before it fully fires off. The engine will give one good attempt, but seems like it may not be getting enough gas then continues to turn over before starting.
-I have adjusted the prime to 150% with no change
I wanted to consult the wealth of knowledge before I play with settings and make the issues worse. Happy to provide whatever extra data that would help with the troubleshooting. Thanks in advance for the help gents!
I'm trying to resolve a couple slight annoyances that I'm having with my Sniper.
1) When the 40 is cold or warm and I decelerate to a stop, the AFR jumps up to 18-20 while the idle goes to about 75 less than target. IAC is zero during that time. It doesn't stall but sure feels close before it catches itself
-I have adjusted the idle ramp down delay to hang slightly longer with no change. I also changed the cam setting to mild. Shots in the dark if nothing else per Cameron's guidance to another post.
2) During the initial start I have to crank it for about 8 seconds before it fully fires off. The engine will give one good attempt, but seems like it may not be getting enough gas then continues to turn over before starting.
-I have adjusted the prime to 150% with no change
I wanted to consult the wealth of knowledge before I play with settings and make the issues worse. Happy to provide whatever extra data that would help with the troubleshooting. Thanks in advance for the help gents!