SOLD Sleeping/Bed Platform for 100 Series - Seattle, WA (1 Viewer)

Status
Not open for further replies.
Joined
Dec 12, 2016
Messages
12
Location
Seattle, WA
Home build sleeping platform for 100 series Land Cruiser. The platform is made out of plywood on a frame of 2x4's and 2x6's. The full platform is comprised of two pieces so that the second piece can easily be unscrewed and the second row seats can be raised. Otherwise, the platform lays on top of the second row to form a fully flat surface. The larger piece in the rear is torqued down to the clips on the floor, so it does not rattle and will still in place on rough roads or in case of an accident. Wood is all stained and sealed.

I custom measured/built this for a 100 series Land Cruiser, so I cannot guarantee that it will fit in anything else. Check out the pics and let me know if you have any questions.

$80 OBO. Mattress not included, but willing to throw in two long storage containers with it. Must be picked up locally.

Dimensions
Rear piece: 51in W x 40in L
Second piece: 51in W x 36 in L
Total Size: 51in W X 74 in L
IMG_4692.JPG
IMG_3553.JPG
IMG_4704.JPG
IMG_3552.JPG
IMG_3550.JPG
 
Status
Not open for further replies.

Users who are viewing this thread

Top Bottom