For bent housings? I have an issue I suspect these will correct. Assuming the 3 degrees is variable as you clock them in various positions the camber becomes caster and vise versa?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Yep, the smaller bearing allows the hole to be offset in the race.
Slee also has a 1 degree if you don't need 3 degrees of correction, likely stronger (bigger bearing).
http://www.sleeoffroad.com/products/suspension_pieces_bushings.htm
Right. Just cut up the strut towers for a guy who's installing some slotted coilover mounting plates and ls3 in an old 240zLet us know how this goes, camber on a straight axle is not something usually messed with but all sports cars add camber.