Slee brake line install. No banjos? (1 Viewer)

[bigakguy]

Went to start installing my slee brake lines on the rear, and the kit they sent me doesn’t have banjo fittings on the rear. Is this correct? I don’t see how they would connect to the caliper.
The drivers and passengers side are also different.

 

[lasoundguy]

Those look like the lines that go from the hard side frame rail down to the axle to me...it's been almost a year since I replaced mine but I used the Wit's End kit and you can see the 7 lines in this pic--three of them are like what you show (no banjo), the other four for the calipers all have banjo's.

HTH.

 

[turbodizzle]

That's the frame to axle kit. You also need the axle to caliper lines.

Stainless Brake Line Kit - Axle to Caliper - '93-97 Land Cruiser / LX 450 with ABS - Slee Off Road

 

[bigakguy]

That's the frame to axle kit. You also need the axle to caliper lines.

Stainless Brake Line Kit - Axle to Caliper - '93-97 Land Cruiser / LX 450 with ABS - Slee Off Road

Got it thanks! Rookie mistake.