Anyone have a skyjacker bushing readily available that they can measure the O.D. for me? Obviously looking for the spring eye side.
Thanks.
Thanks.
Skyjacker bushing O.D. measurement please... (1 Viewer)
- Thread starter DomSmith
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
OD (part that goes in the spring eye) is right at 1". I measured it with a metric ruler also and it measured 26mm.
I'm sorry I don't have a set of calipers to measure it with. I have a brand new set of 16 bushings that I just got from skyjacker that are still in the box. If you need anymore measurments let me know.
Copenhagen1
I'm sorry I don't have a set of calipers to measure it with. I have a brand new set of 16 bushings that I just got from skyjacker that are still in the box. If you need anymore measurments let me know.
Copenhagen1
- Thread starter
- #3
Thanks for taking the time Cope. I switched shackles (9/16" bolts) and needed new bushings which turned out to be a bit of a pain. I'm running the 4" Skyjacker lift and they only make bushings for the stock shackles to go with their 1 1/16" (as it turns out) O.D. bushings.
So I bought some 1" O.D. with 9/16" I.D. bushings from SOR for the frame eyes and had to get other 9/16" I.D. bushings with 1 1/8" O.D. from SOR and shaved the O.D. to match the eye of the skyjacker spring.
Not too much work, but I certainly thought I could buy something off the shelf.
So I bought some 1" O.D. with 9/16" I.D. bushings from SOR for the frame eyes and had to get other 9/16" I.D. bushings with 1 1/8" O.D. from SOR and shaved the O.D. to match the eye of the skyjacker spring.
Not too much work, but I certainly thought I could buy something off the shelf.
