- Joined
- Jan 12, 2008
- Threads
- 285
- Messages
- 3,352
- Location
- West MI near GVSU
- Website
- www.mcdesignsoffroad.com
Yeah, that's me.
The A-pillar half should float quite a bit. The 4-hole nut plate has quite a lot of adjustment if it's not seized inside the A-pillar. I would try to make sure it's free before making mods. Typically that and the added slots in the door halves are plenty for alignment. Please let me know if you need further assistance. Do you know if @SMG had them adjusted?
The A-pillar half should float quite a bit. The 4-hole nut plate has quite a lot of adjustment if it's not seized inside the A-pillar. I would try to make sure it's free before making mods. Typically that and the added slots in the door halves are plenty for alignment. Please let me know if you need further assistance. Do you know if @SMG had them adjusted?