show us how you mounted your winch controls

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 7, 2007
Threads
83
Messages
500
Location
Raccoon City
Website
www.coopxgear.com
Show us some pics of how you mounted your winch control box.
 
Here is mine in front of the battery. Out of weather and it keeps the front bumper looking cleaner.
winch2.webp
 
Pretty slick. Can you show a picture of your front bumper too.
-Jeff

Here is mine in front of the battery. Out of weather and it keeps the front bumper looking cleaner.
 
Warn Winch Controls

I mounted mine down low, utilizing the Warn Mount bracket. You can't tell from the pics, but it's above the botom of the framerail, therefore IMO it's protected.

Security (out of sight our of mind)and aerodynamics. ;)

ctp 152.webp
ctp 152.webp
 
Last edited:
In cabin controls

Here are mine with an arm/disarm switch. This switch also disables the box mounted to the winch for use with the hand held control.

Steve
94' 190,000
P1010240.webp
P1010242.webp
 
how difficult is the inside the cab winch control mod to do?
 
That depends entirely on your switch selection.
 
i've been looking but haven't found anything. Where can i find what the options are for the switches?
 
Greetings:

Antenna up/down switches from CDAN 93/94 style or 95/97 style available. The switch connects to the winch control box via Slee's module tucked up under dash. Works flawlessly.

Steve
94' 190,000
 
I mounted my box off the antenna mounting tab on the ARB.

Pics soon...

It will be eliminated later in favor of dash swithes and a wireless remote kit.
 
Here's how I mounted my 'box" and interior controls. I later removed one switch, so I only had the in and out. Then I removed the winch altogether and put on the Shortbus. Now I need another winch.
winch pics 026 (Small).webp
3-6-07 (Small).webp
winch pics 020 (Small).webp
 
^ not bad except you have to open the hood every time to hook up the remote. Any chance you have in cab controls?


Opening the hood while winching ain't a bad thing....sorta protects the occupants in case of a winch line breakage :doh:
 
Wireless Remote?Is the module from Slee difficult to install if your not a electrical genius?
 
Slee module is not difficult to install if you follow the instructions. Five wires from Slee's module are connected to the Warn box via wiring harness. I made my own harness from a four wire trailer harness and one extra black lead running from the Warn box through the firewall and to Slee's module. Then hooked up the kill switch and in/out switches to the module.

Steve
94' 190,000
 
Back
Top Bottom