Sequoia A750F transmission and H2FA Transfer case ( Passenger side drop) (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 19, 2012
Threads
27
Messages
89
Location
san francisco
Folks,

I'm eying a wrecked 2005 Sequoia , It got 2UZ 4.7 with A750F with a driver side drop transfer case.

2003 Land Cruiser also have 2UZ 4.7 with A750F with the passenger side drop.

For my build.. I need Passenger side drop.

Question, Do you guys think Extension housing and Transfer case from Land Cruiser will bolt up to Sequoia transmission ? Since both transmission are A750 ....all I need to worry about Transfer case electronics ..correct ? If yes what is required to manage transfer case ?

Any insight will be appreciate.

Thanks
Zafar
 
Main shaft is different you’d have to fully disassemble the transmission to replace.
That being said I have an a750f from 05LX. I’d part with. I’ve had it about 4 years in hopes of a 5 speed auto swap in my 80 that will likely never happen.
 
Main shaft is different you’d have to fully disassemble the transmission to replace.
That being said I have an a750f from 05LX. I’d part with. I’ve had it about 4 years in hopes of a 5 speed auto swap in my 80 that will likely never happen.
Do you still have any his transmission?
 
I do not sold it last week.
 

Users who are viewing this thread

Back
Top Bottom