searching for transmission cooler lines fab writeup (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 20, 2005
Threads
34
Messages
243
someone did an awesome job of detailing their cooler line fabrication which I did not bookmark like a dummy
I think it is in the middle of a build hence search not helping

Does anyone recall this writeup?
Last step left in a big "while you're there" that began with addressing a leaking radiator
Thank goodness the time spent working on your LC doesn't come off your life total count -
 
1. Buy some hose
2. Buy some clamps
3. Buy some protective braidy stuff, optional?
4. Cut to length, install
5. Step back and admire your craftiness

g4YHyo9h.jpeg


pKrE9Soh.jpeg
 
1. Buy some hose
2. Buy some clamps
3. Buy some protective braidy stuff, optional?
4. Cut to length, install
5. Step back and admire your craftiness

yeah, there's that -

this writeup had some great research on different hose psi/temp specs - finding that some local shop transmission hose was probably not up to the job - that 's the info I'm looking for, should have been more specific
 
 
Bingo

Guess I needed the magic woid “hoses”

Some good information in that thread including your contributions effjay

Thanks
 
I'd recommend constant tension hose clamps if you're that worried about the hose holding up.
 
This job pegged the profanity meter in my shop. :)
I thought I’d pegged the meter with the PHH and its brother

Good times

But found a workaround for the no-longer-available-formed-right-angle-hose-so-you-have-to-use-a-unicoil
 
I thought I’d pegged the meter with the PHH and its brother

Good times

But found a workaround for the no-longer-available-formed-right-angle-hose-so-you-have-to-use-a-unicoil

EFDA5A23-4493-4984-BA00-C8C8D9086854.jpeg
 

Users who are viewing this thread

Back
Top Bottom