- Year
- 1995
- Vehicle Model
- 80 Series
- Location
- Sacramento, California United States
- Mileage
- 295000
- Color
- rgb(5, 50, 22)
Testing the waters on my FZJ80, looking to sell or trade
It has all the bells and whistles minus belly pans
Old Man Emu 2.5” lift
37x12.5 Yokohama Geolander tires
17x8.5 Fuel Anza Wheels
TrailGear Front bumper
Apex 12,000lb Winch
Replica BajaDesigns LP9 lights
HID headlights
4x4Labs Sliders
4x4Labs Rear bumper with swingout and cooler carrier
48” HiLift Jack
Prinsu Roof Rack
Nitro 4.88 gears
TJM Pro Lockers front and rear
ARB Compressor
Wits End Quarter Panel mount
12” sub
Door speakers
Alpine Head unit
Wits end Cubby holder with phone mount and Gyro Cup holder
OBD2 Scangauge
Snorkel
OEM second battery tray
2 batteries
Maintenance:
Newer motor 160k miles or so
Head gasket Done
PHH done
New starter
New thermostat
New radiator
New radiator hoses
Wits end blue fan clutch
Sealed OEM Radiator shroud
New cam position sensor
New crank position sensor
All fresh fluids oil all the way to diffs including trans, TCase and coolant
Insulated and re-routed engine harness (away from EGR)
Hood risers
Probably some other things I’m forgetting
Mud only let me upload 5 photos, tons more upon request
Willing and open to answer any questions you may have.
$16,000 FIRM
Located in Sacramento California
It has all the bells and whistles minus belly pans
Old Man Emu 2.5” lift
37x12.5 Yokohama Geolander tires
17x8.5 Fuel Anza Wheels
TrailGear Front bumper
Apex 12,000lb Winch
Replica BajaDesigns LP9 lights
HID headlights
4x4Labs Sliders
4x4Labs Rear bumper with swingout and cooler carrier
48” HiLift Jack
Prinsu Roof Rack
Nitro 4.88 gears
TJM Pro Lockers front and rear
ARB Compressor
Wits End Quarter Panel mount
12” sub
Door speakers
Alpine Head unit
Wits end Cubby holder with phone mount and Gyro Cup holder
OBD2 Scangauge
Snorkel
OEM second battery tray
2 batteries
Maintenance:
Newer motor 160k miles or so
Head gasket Done
PHH done
New starter
New thermostat
New radiator
New radiator hoses
Wits end blue fan clutch
Sealed OEM Radiator shroud
New cam position sensor
New crank position sensor
All fresh fluids oil all the way to diffs including trans, TCase and coolant
Insulated and re-routed engine harness (away from EGR)
Hood risers
Probably some other things I’m forgetting
Mud only let me upload 5 photos, tons more upon request
Willing and open to answer any questions you may have.
$16,000 FIRM
Located in Sacramento California
Last edited: