Scott_sFZJ80 - Locked '93 w/70K miles in Chicagoland
This is cool; I have Rig Of The Week this week and Surf N Turf next week. Now I tend to be long winded in my posts so I am going to try my hardest to keep it short. Basically I’ll do a list of the modification followed by pictures. Included with the list I’ll do a rating system of my satisfaction with the modification (with five asterisks being the highest).
Stuff I bolted/wired/cut/screwed/snapped/drilled on myself…
Hanna Quality Sliders (*****)
Slee Front Bumper (*****)
OME Heavy - [Springs; 850 & 863, Shocks; N73L & N74L, Steering Damper, Caster Kit] (****)
Tires, set one; Goodyear MT/R 305-70-16 on stock alloys (***)
Tires, set two; Mickey Thomson Baja Claws (35X13.50-16LT-6 ply) on MB Motoring 70 Aluminum Wheels 16x8 (**)
SS Extended Brake Lines (****)
Slee Heavy Duty Relay Rod and Tie Rod w/Ends (*****)
Slee Sway bar Drop Brackets and Blocks (***)
Slee Bump Stop Blocks (***)
Slee Light Upgrade Harnesses (****)
Pro Comp Driving Lights (***)
Hella Horn (-*)
Tire mount (*)
Speedometer Correction Gear (****)
Toyota Side Markers (****)
Toyota Center Diff Lock Switch (*****)
Toyota Hand Throttle (****)
Toyota Auxiliary Light Switch (***)
Winch (***)
My personal creations…
Hi lift mount – basically a set of muffler clamps (****)
Camera mount – basically a 1/2” conduit flattened with two holes drilled out (***)
Magnets – a 50x2 foot length of flexible magnet cut to fit (**** and a half)
This is cool; I have Rig Of The Week this week and Surf N Turf next week. Now I tend to be long winded in my posts so I am going to try my hardest to keep it short. Basically I’ll do a list of the modification followed by pictures. Included with the list I’ll do a rating system of my satisfaction with the modification (with five asterisks being the highest).
Stuff I bolted/wired/cut/screwed/snapped/drilled on myself…
Hanna Quality Sliders (*****)
Slee Front Bumper (*****)
OME Heavy - [Springs; 850 & 863, Shocks; N73L & N74L, Steering Damper, Caster Kit] (****)
Tires, set one; Goodyear MT/R 305-70-16 on stock alloys (***)
Tires, set two; Mickey Thomson Baja Claws (35X13.50-16LT-6 ply) on MB Motoring 70 Aluminum Wheels 16x8 (**)
SS Extended Brake Lines (****)
Slee Heavy Duty Relay Rod and Tie Rod w/Ends (*****)
Slee Sway bar Drop Brackets and Blocks (***)
Slee Bump Stop Blocks (***)
Slee Light Upgrade Harnesses (****)
Pro Comp Driving Lights (***)
Hella Horn (-*)
Tire mount (*)
Speedometer Correction Gear (****)
Toyota Side Markers (****)
Toyota Center Diff Lock Switch (*****)
Toyota Hand Throttle (****)
Toyota Auxiliary Light Switch (***)
Winch (***)
My personal creations…
Hi lift mount – basically a set of muffler clamps (****)
Camera mount – basically a 1/2” conduit flattened with two holes drilled out (***)
Magnets – a 50x2 foot length of flexible magnet cut to fit (**** and a half)