Wanted Right Rear FJ40 Spring Hanger (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I have both sides I can probably cut off for you. Are you sure you don't want to use something more heavy duty, like Ruffstuff or similar?
 
I have both sides I can probably cut off for you. Are you sure you don't want to use something more heavy duty, like Ruffstuff or similar?


Second that. The more I look at the stock part and the Ruff Stuff side by side, the more I tell myself I wouldn't go thru the effort to remove a stock one just to replace it with another stock one.

Hangers here:

FJ40 Leaf Spring Hanger [0690047] - $31.00

Further down the page is a pic of a frame mounting platform you can use if you are not comfortable triangulating your own gussets to support the outboarded hanger.

Best

Mark A.
 
Well, I already cut the stock one off. I was flexing my rear suspension and noticed the top bracket had started to separate pretty badly from the hanger itself. I cut off the rivets and pulled it only to notice it was full of rot. No big surprise...I figured the PO's booger welds were hiding something there. Maybe I'll do the RS mounts. Thanks.
 

Users who are viewing this thread

Back
Top Bottom