I would like to replace the whole parking brake handle assembly on my 85 HJ75. Unfortunately the part numbers in the parts book are not available anymore. Anyone know any other options? This is a rhd.
Replacement brake handle options? (1 Viewer)
- Thread starter coldtaco
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
What? I had nearly $2.00 invested in that string.
jblueridge
SILVER Star
I got mine from Partsouq, but that was 2 years ago.
The part listed at the top of this clip from Partsouq is what belongs in my 1988 BJ74 RHD.
Their suggested substitutions is what I bought: it is black, not gray. I don't care.
Amayama shows they have a replacement for the replacement. I think. See pics below.
The part listed at the top of this clip from Partsouq is what belongs in my 1988 BJ74 RHD.
Their suggested substitutions is what I bought: it is black, not gray. I don't care.
Amayama shows they have a replacement for the replacement. I think. See pics below.
- Thread starter
- #4
Thanks I will try them. Dave can’t get them so figured no one else can get them if they truly are not manufactured any more
46210-60170-B0 is listed for jdm 70 series from 90-04 and is available in north america. I'm not sure if it fits but thinking using it on my 89
This picture is from page 6 of this thread AVAILABLE 7X SERIES PARTS--USA MARKET
This picture is from page 6 of this thread AVAILABLE 7X SERIES PARTS--USA MARKET
c2dfj45
Supporting Vendor
We are installing 46210-60170-B0 on the 92 Troopy.....$41 from Megazip. Grey handle.
I was going to use a 76 series(2014) handle we had from the 79 build but it interferes with the center console we are running. The 76 is different for sure from the 75/79. They bolt in the same though and the cable attaches....it works just fine. I think it's just angled differently. They all seem pretty interchangeable.
I was going to use a 76 series(2014) handle we had from the 79 build but it interferes with the center console we are running. The 76 is different for sure from the 75/79. They bolt in the same though and the cable attaches....it works just fine. I think it's just angled differently. They all seem pretty interchangeable.
- Thread starter
- #8
That will work.
Parts came today and I installed them no problem. There are a couple of differences that don't really mean much, mounting and dimensions are identical. The only thing I had to modify is the brake light switch, this new one has one wire while mine had two and connectors weren't compatible. I simply switched the old one over since it fastens to the lever in the same way. I'm also not sure if the boot is meant to be installed through the floor cover hole or just rest on top of it, mine didn't have a boot before. My 70 is lhd but these are the same part numbers listed for the jdms
- Thread starter
- #10
Thanks 
