Just replaced all four globes with new ones and did removed all air in system. Height control was working perfectly fine before. Now I’m stuck in lo and OFF is flashing. Help!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I picked it up from my local toyota, it was the canned 2.5 liter…. Is that the problem? I just find it so strange that it was working fine before with dirty fluid and now it stuck. :/Probably a good start would be to try to read any error codes, with Techstream, iCarsoft, or equivalent.
Similar experience/thread here:
AHC Inop after fluid change 2007 lx C1751 and C1762
HELP!!! I just did the PADDO method of AHC fluid change today while wrapping up baselining a new to me 07 lx. 160k no documented AHC maintenance. Things went more or less fine but now AHC is inoperable!!! I turned the truck on the first time after the left side blead and it took about 2 min or...forum.ih8mud.com
Did the new AHC fluid come from a plastic bottle, or a metal can?
Nope, metal can is good, they did have some issues with contaminated fluid in plastic bottles a while back.I picked it up from my local toyota, it was the canned 2.5 liter…. Is that the problem? I just find it so strange that it was working fine before with dirty fluid and now it stuck. :/