Removal of front PS seat

Discussion in '80-Series Tech' started by Riley, Jul 14, 2005.

  1. Riley

    Riley

    Messages:
    1,621
    Likes Received:
    12
    Joined:
    Jun 20, 2003
    Location:
    Fort Langley, BC
    It was recommended in this thread on AC work to remove the front PS seat to allow better access:

    https://forum.ih8mud.com/showthread.php?t=51318

    Looks easy enough to remove except I'm wondering how the plastic cover pieces are held on over the rear mounting bolts. Are they just force fit on?

    Can I safely pop them off with a screwdriver?

    Thanks in advance

    R
     
  2. cruiserdan

    cruiserdan SupportingVendor Emeritus Moderator

    Messages:
    22,360
    Likes Received:
    6,741
    Joined:
    Mar 27, 2003
    Location:
    Land Cruiser Heritage Museum broom closet
    They clip on to the seat rail brackets. They have small tabs that slipover the edge of the brackets. It is tricky to gert them off without damaging the tabs. Since the weather is warm you should be able to remove them without breaking them. You have to carefully pry them off. In cold weather it is quite easy to break off the tabs. I recommend you move the seat back to remove the front bolts and the slide it forward to remove the rear bolts. Then rock it back to unplug the power connector and remove the seat thru the front door opening.
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.