rear seat belt help... part numbers or just weird? (1 Viewer)

Joined
Oct 26, 2016
Messages
213
Location
AL
howdy

getting ready to ship this thing back to US for DD use. missing male ends of seatbelt. I have owned other 80 series in past, but they had the over the shoulder seatbelts in rear seat.

can't pin down part number I might need, or is this something odd. adding picks of seats on each side and what could be anchorpoints maybe behind seat. unless belts were built into seat. scratching head trying to figure out what goes where.

thanks for any responses.

belt1.jpg
belt2.jpg
belt3.jpg
belt4.jpg
 
Joined
Nov 9, 2012
Messages
11,056
Location
Olathe, KS, USA
The "C" shaped clips are cargo tie-down clips and no relation to the seatbelts.

The female seatbelt sections you have are not installed where they need to be. Those appear to be front seat anchors bolted to the location where the shoulder belt anchor would be.
The female end of the belts would be attached to the rear seat itself. I'm not sure exactly how it's attached, but you may need to buy seat belts from a salvage vehicle for the second row and add them to your truck.

What year is your truck, as that is a variance in the seatbelt attachments. 91-92 have different male/female clips than the 93+.
 
Joined
Oct 26, 2016
Messages
213
Location
AL
Thanks something looked off

Truck is a 95

Have to get alt fuel solenoid from junkyard soon will add seatbelts to list


Weird thing that pillars do not have attachment for shoulder
 

Users who are viewing this thread

Top Bottom