Bama4door
Supporting Vendor
My rear diff actuator was seized up when I bought it. Tried rebuilding/repairing, but it was too far gone. So I ordered a new Aisin unit.
My issue...when I was originally disconnecting the locker harness(from frame) from the stock locker actuator, the pigtails/connectors were severely corroded and seized. Once I got them separated, the connector from the locker harness was unusable and a couple of wires pulled out of the pigtail. So I need a replacement plug/connector to splice into the stock locker harness.
I found an old thread from Beno that has all of the locker harness plug part numbers, but a quick google search turns up nothing for the plug I need (White: 6 cavities, 5 used: 90981-11290). See thread below:
80 Series Rear Locker Sub-Harness Information
Any ideas or thoughts on what to do? I've reached out to 12voltguy (he hasn't responded to any of my emails over the past 2 weeks) as he sells a replacement e-locker harness (and has the plug I need listed on his website).
My issue...when I was originally disconnecting the locker harness(from frame) from the stock locker actuator, the pigtails/connectors were severely corroded and seized. Once I got them separated, the connector from the locker harness was unusable and a couple of wires pulled out of the pigtail. So I need a replacement plug/connector to splice into the stock locker harness.
I found an old thread from Beno that has all of the locker harness plug part numbers, but a quick google search turns up nothing for the plug I need (White: 6 cavities, 5 used: 90981-11290). See thread below:
80 Series Rear Locker Sub-Harness Information
Any ideas or thoughts on what to do? I've reached out to 12voltguy (he hasn't responded to any of my emails over the past 2 weeks) as he sells a replacement e-locker harness (and has the plug I need listed on his website).