Real Time Help! (1 Viewer)

[Josie'sLandCruiser]

Hi All:

No, it is not an emergency, but I was hoping to install the part today!

Does anyone know the size diamensions and thread pitch of the screws that attach the windshield frame to the windshield frame hinges? I figure I'll damage the existing ones so seek to purchase some new ones today.

Thanks for any help!

Alan
Seattle

 

[Herb]

CCOT has them in their bolt kits section. You can call them.

www.coolcruisers.com

 

[Poser]

8mmx1.25

I used a non taper head fastener, 25mm long when I removed all the rusted phillips taper-head screws back in 1995...been fine since.


Good luck!


-Steve

 

[Josie'sLandCruiser]

Hi All:

Thank you Steve! You be "the Man!"

Regards,

Alan
Seattle

 

[camcruiser13]

8mmx1.25

I used a non taper head fastener, 25mm long when I removed all the rusted phillips taper-head screws back in 1995...been fine since.


Good luck!


-Steve

i second, and i found them at my local hardware store cheap.

 

[camcruiser13]

Hi All:

Thank you Steve! You be "the Man!"


Seattle

this is true