Readers Rides, for pics and specs on your Toy(s). (3 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

16” Tundra steelies. Hoping to get rid of them soon and go back to 15” 👍🏼

I tried that same wheel on my 1989 and the center bore was too small for my IFS Aisin hubs. Are you using spacers or do they fit the 85 SFA without them?
 
I tried that same wheel on my 1989 and the center bore was too small for my IFS Aisin hubs. Are you using spacers or do they fit the 85 SFA without them?
No sir no spacers. I did have to grind down a very small part of the knuckle though. There is a little rubbing from the tires at full lock but not that bad
 
D67B65B3-D410-4F40-B6BF-B279D8463E5C.jpeg
AF8F6559-BBA4-423E-B3FB-44C8DD473EE8.jpeg
7D29FC65-7409-4B6F-B524-E25455388513.jpeg
C4DD4AC0-F02E-49D4-8FB0-F1B92CACDF66.jpeg

‘89 Pickup SR5 @~201K

If anyone notices, these photos happen to be taken before and after tire replacement of like tires.
 
Since last post:
372C8F04-4B06-47F5-A4E7-B19005D3FE72.jpeg
9BFAEB43-4AB2-4B18-A223-D11C458C8F34.jpeg
Removed the chrome fender garnishes, removed the hub caps, painted wheels grey and added 33x10.50r15 Maxxis Razrs
 
585180C2-61F3-4500-B249-0E9ADE001D24.jpeg
Bought this 80 from a farmers field in Fresno, ca a couple years ago while on vacation. $1500 blue 1999 plates and melting into the ground... bought a Weber, cap rotor blah, blah. Started right up. Went back to Hawaii where I live and left it at my dads house. Next time I went to Cali I had OME 2” springs, shackles, unbolt flip kit delivered there and my son and I installed the lift. Shipped her back to Hawaii and has been our surf/beach truck since.
5399D301-156A-4470-B59C-80BB895C861A.jpeg
the old paint and lack of clear coat let rust start to invade the old girls panels and I’ve been enjoying driving her more and more... after contemplating paint ended up taking everything but the cab and engine apart and cutting,shaping new metal in, epoxy primer, filler primer, sealer, 2 coats single stage, wet sand, 2 coats single stage mixed 1:1 with clear, raptor liner... 5.29’s and grizzly locker waiting to go in after bodies done. Work in progresss
32BB4BF3-0686-406F-8C0C-4DA581BA6DDF.jpeg
D2BBD982-8AA8-445C-9E5D-CECCB2DBA3F2.jpeg


BE813BBD-14E9-4421-9C82-79D6723E6ECC.jpeg
 
Dang! Just dang!
 
IMG_0402.JPG
 
What series is it raced in? 1450 used to be a MORE class, don't know if any of the others picked it up or not.
 

Users who are viewing this thread

Back
Top Bottom