You're welcome. FYI, Cruiser Cult has reflectors dead cheap - Koito body reflectors - https://cruiser-cult.myshopify.com/products/koito-body-reflectors
RE: Advice from FJ25 'ers' for my 1964 FJ40 (2 Viewers)
- Thread starter andybudge
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Looked in the parts stack and I have a set of stimsonite reflectors. And new Aluminum stratolites. No koito unfortunately.
HelloKitty65
SILVER Star
You can still get Stratolites in an auto parts store (well stateside anyways). That's where our dealers got them in the first place.
Last edited:
- Thread starter
- #425
On order. Thanks for the superseded part #. Came up a blank with the earlier #
Unfortunately, being Toyota you get to buy the screws and washers separately. Or get them from Belmetric - Phillips Flat Head 4.8 Zinc M8X1.25 Coarse DIN 965 - https://belmetric.com/m8-flat-head-phillips-steel-4-8-zinc-plated-din-965/?sku=MSF8X12CLZ
- Thread starter
- #428
Would you have the superseded part #'s for the Bolts and Washers for Door and Pillar Striker Plates? My early #'s nla.
93220-18016 ( Screw) x 8
94524-00800 ( Washer) x 8
- Thread starter
- #429
No luck sourcing a lower Hinge for the Spare Wheel Carrier.
Had one made. Turned out like new.
The original poorly repaired where it had cracked.
Had one made. Turned out like new.
The original poorly repaired where it had cracked.
Try 9015980099 for a screw and washer combination. They were used later on the barn doors' locks. I have bought a lot of hardware from Toyota and have a ton of plated stuff but cannot confirm since mine is a patina resto, I generally use clean old hardware.
- Thread starter
- #431
Unfortunately, nla too.
- Thread starter
- #432
Found a pair of Steps in South Australia
- Thread starter
- #433
A bit more progress.
Softtop Frame next
- Thread starter
- #434
This journey started way back when I was 8! (58 next Bday!)
My first experience with a Toyota 40 Series Landcruiser was when I was 8 years old, my Dad ( George ) picked up a brand new FJ45 from the Dealer here in Perth and my younger Brother and I rode home (Kalgoorlie) in the Trayback ( with Furniture and many other supplies). It was a cherished memory!
This memory is one of the many reasons why I love the early Landcruisers, so much.
Well, mine is close to finishing! I've dedicated the Restoration in memory of my Dad.
I've had this made to put on the Vehicle on completion.
What shows white on the decal is Chrome. It is cut to shape.
My first experience with a Toyota 40 Series Landcruiser was when I was 8 years old, my Dad ( George ) picked up a brand new FJ45 from the Dealer here in Perth and my younger Brother and I rode home (Kalgoorlie) in the Trayback ( with Furniture and many other supplies). It was a cherished memory!
This memory is one of the many reasons why I love the early Landcruisers, so much.
Well, mine is close to finishing! I've dedicated the Restoration in memory of my Dad.
I've had this made to put on the Vehicle on completion.
What shows white on the decal is Chrome. It is cut to shape.
- Thread starter
- #435
A bit of a pain!
Auto Electrician lost the Keys to my 40.
I have read that there is only 6 types of Locks(?)
Door lock number is 4442
Ign lock number is 1123
Anyone have corresponding original Keys spare?
Auto Electrician lost the Keys to my 40.
I have read that there is only 6 types of Locks(?)
Door lock number is 4442
Ign lock number is 1123
Anyone have corresponding original Keys spare?
Bear
SILVER Star
Andy,
Try ToyotaMatt--he may have the key blank you need.
Try ToyotaMatt--he may have the key blank you need.
I hope he is rewiring the whole 40 for no charge after this.
- Thread starter
- #438
Very annoying!!
Andy
i DO have both #1 and #4 Single sided Blanks in the super high end itialian maker SILCA
- i ONLY have NOS OEM TOYOTA in the #1 code series
- long since sold out of the #4 oem blanks , sorry
- i CAN sst machine code cut them , or simply mail u blanks
- i have as many SILCA blanks as u need
- i ONLY have qty x two # 1 OEM series blanks remaining
VintageTEqParts.com
vintageteqparts.com
if your confused with all the numbers it's OK , i am still too a tad ......
below is my T-TEN Study Aids to Empower You Through Teq FSM based Education ...........
- i now think everyone needs to brush up on there OLD SKOOL Single Sided Keys Identification
- so i invited some friends over for show and Teq Tell ...........
i bet Mr. Pardon has his own paper parts cataloger keys to his own kingdom sitting on a dusty shelf ?
but not for long because here he comes ..........
-
@pardion
@middlecalf
@65swb45
@HelloKitty65
@Indygbd
@mmcinnis
@Living in the Past
@Green Bean
@EWheeler
@Chungas Revenge
Last edited:
- Thread starter
- #440
Weather average here.
A few 'small' jobs done.
A few 'small' jobs done.
