Quick question about wheels/backspacing (1 Viewer)

[NickT916]

American racing teflon mojave wheel
16x8
offset 0mm
bolts 6x139
backspacing 4" or 4.5??

i will be running 285/75-16 (currently 2" lift, might go 3") should i do 4" backspacing or 4.5"? i want the wheels to be more flush with the fenders to get a wider stance a bit.

 

[CreeperSleeper]

That should be a 4" (-ish) BS-ing.

 

[d0ubledown]

yep...less than stock BS to push wheels out more. stock is 4.5 therefore 4" will push them out .5"

 

[NickT916]

it seems as mojaves dont come in 4" BS only 4.5 according to this one site..

 

[d0ubledown]

you can always get a set of 1" wheel spacers. got em on my ride. it effectively makes the wheels a 3.5" BS

 

[Beowulf]

0 offset and 8" rim width makes those a 4.5" back space rim. Same as the stock Toyota steelies and alloys. There is a chart hanging around one of the threads that has a great illustration of where all the wheel measurements are made. The rim width is basically an ID and the Wheel backspacing is measured from the outer point of the rim.
-B-

 

[NickT916]

with a spacer, making it 3.5 bs it wont be to wide out will it or just flush?

im thinking 285/75-16 tires and 3" lift maybe