Questions on Body Placement: Rebuilt Frame & Body (1 Viewer)

Joined
Dec 1, 2009
Messages
488
I rebuilt my frame and body and put in a 3B with 5-speed.

My body wants to sit way too high and I need some advice/ troubleshooting help.

1) How does my transfer case sit in comparison to yours
2) Hows does the space between the transfer hump and transmission look

Thanks!
ForumRunner_20120629_135046.jpg
ForumRunner_20120629_135132.jpg
ForumRunner_20120629_135151.jpg
 
Joined
Dec 1, 2009
Messages
488
Then the body will hit the transmission, or if I just turn the ones in the back the body won't lay even.
 
Joined
Apr 13, 2011
Messages
1,970
Location
Austin, Texas
I can't tell from your pictures what your clearance is, but, the body does not sit all the way jdown on that bumper. You could also go with a very small noddy lift if you needed.

This is how it sits...
image-2186093004.jpg
 
Joined
Dec 1, 2009
Messages
488
I think that my engine and transmission have been mounted too high. A picture of some transfer case hang, or of how far the transmission should be from the transmission cover (1980 BJ40)
 

Users who are viewing this thread

Top Bottom