Prospeed 100 series roof rack for Landcruiser and LX470!

[HardImpactDesigns]

Great simple but effective design!

Thanks for the recognition Brian! When I returned to Georgia from New Mexico, after a LONG drive, and removed the pins from the brackets I almost cried with joy at how easy it was to remove the RTT. Within 10 minutes of pulling into my driveway the RTT was off the truck and in the garage!

 

[KCoverland]

I just wanted to chime in and give Prospeed Rack a shoutout for being 100% easier to install and remove tents with over Prinsu or some of the other brands. We helped a couple of friends install their new RTT’s, and had to spend 3 hours messing with the cross bars on the Prinsu rack, whereas with our Prospeed, it took less than 30 minutes from removing our old soft shell, to tightening down the bolts.

Plus it just looks so nice and low profile

 

[arkmm]

I just wanted to chime in and give Prospeed Rack a shoutout for being 100% easier to install and remove tents with over Prinsu or some of the other brands. We helped a couple of friends install their new RTT’s, and had to spend 3 hours messing with the cross bars on the Prinsu rack, whereas with our Prospeed, it took less than 30 minutes from removing our old soft shell, to tightening down the bolts.

Plus it just looks so nice and low profile
View attachment 3207420

what method did you use to get it done so quick? which size and model tent is that? looks like a good fit. I got a St Helens because it was such a small footprint up top but I miss the room of my old tuffstuff alpha2

 

[KCoverland]

what method did you use to get it done so quick? which size and model tent is that? looks like a good fit. I got a St Helens because it was such a small footprint up top but I miss the room of my old tuffstuff alpha2

This is the CVT Mt. Triumph Medium size, snagged 2 of them from their Chattanooga store close out sale for $4,000 out the door, so it was time to upgrade.

We unbolted the cross bars and lifted the old tent straight up and off the rack, then turned it over, measured the cross bar location, transferred that measurement over to the new tent, bolted the cross bars to the new tent, hoisted it up there with the help of a couple friends (because the Prospeed rack has slots on the side panels rather than individual holes for the cross bar bolts like Prinsu, we just had to be close on the cross bar measurement) and it mounted right up.

 

[LXPlode]

How are you doing with that ladder development brother?

 

[prospeed]

 

[prospeed]

View attachment 3274850

we have a sale going on till the end of the month right now. Go to prospeedrack.com to check out the deals! 15% off racks and 10% off accessories

 

[Martaigne]

Thanks, I picked one up.