But weighing in at two feet long, there would be no hiding that puppy
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
When the aliens directed us to hydroboost, we found this cool remote setup, which looked like it might be easy to stash somewhere out of sight
View attachment 2732705
We crawled all under the bed and along the frame rails, but something was always in the way, or if we found a good spot, would be impossible to fill the master.
Then we were standing there at the front of the truck when the rest of the message came through…
Fill the massive void on the passenger side. Mirror the master cylinders on the firewall.
We crawled all under the bed and along the frame rails, but something was always in the way, or if we found a good spot, would be impossible to fill the master.
Was shifting the engine towards the pass side an option?Then we were standing there at the front of the truck when the rest of the message came through…
Fill the massive void on the passenger side. Mirror the master cylinders on the firewall.
Luck is a definition of skill!All of our calculations led us to believe that part of the adapter/slave would come through the firewall at the same spot as the glovebox floor.
With a little alien luck, both the punch and drill bit walked on the bumps of the liner Nolen sprayed on the firewall, shifting our hole down just enough to only barely scratch the underside of the floor with the hole saw:
View attachment 2733770
We got a second helping of good luck when we found out that we can fully access the bleeder from below, so no glove box will be occupied or harmed. (Forgot to take a pic)
Plumbing required.So you have a small master attached to the pedal which operates a slave which operates the hydroboost which operates the brakes?
Don’t forget that to operate the pedal:Ok, so small master attached to the pedal with a line going to a slave which operates the hydroboost with lines going to the brakes to operate them...
Add in proportioning valves, residual valves, tees, metering valves, combination valves, flex lines, disc/drum setups, etc. as necessary...
At my age you are stuck with it for a few days.How old do you have to be to read that to a tune in your head?