For Sale Price Reduced: Off-Road Trailer FS near Sacto

Joined
Jan 29, 2003
Messages
2,617
Location
Peyton, CO
Visit site
On/Off-Road Trailer for sale:
Price Reduced to $1400
Located in Yuba City, California.

Details-
Brand new trailer custom built for Cruiser tow rig.
Box dimensions 62x40x18 (inches)
Removable pintle ring hitch
Axle is custom built with TLC spindles, wheel hubs, bearings, and locking hubs
6 on 5.5" bolt pattern
fits tires up to 35x12.50 tires on 15x10 wheels
(Tires and wheels are included but are used. They are the same ones ias shown in the pictures.)
Clearance under axle is 15.5" minimum with 35" Tires
Land Cruiser leaf springs
Drop-down tailgate with latches
Tailgate is also easily removable in about 1 minute
Box is removable from frame (6 bolts)
Fenders are bolted for easy repair/replace if ever needed
Side steps front and rear
Front storage area
Cargo tiedowns
Can turn 90 degrees to Cruiser without interference
Can rotate approx 45 degrees left or right with pintle
Can move up or down 90 degrees with pintle
Trailer light wires unplug from trailer at frame for trail use
Frame and steps are black. Box is primered grey and ready to be block sanded and painted.
I could also paint it for you for a little more $$

Willing to deliver it within a 100 mile radius. Anything farther away can be negotiated.


To contact me directly.
Mike Robinson
eMail: cruiser_man@lycos.com
 
Joined
Jan 29, 2003
Messages
2,617
Location
Peyton, CO
Visit site
Axle was built from ~3" o.d. tube and custom flanges. Flanges are welded to ends of tube. Flanges then allow Land Cruiser spindles to be bolted to them. Bearings, hubs, and the rest of the outer axle is then assembled just like a Cruiser.
 

Users who are viewing this thread

Top Bottom