JDNs78FJ40
SILVER Star
I'm hopefully starting my 78' 2F this weekend for the first time in over 3 years. Engine wasn't rebuilt but all new seals and gaskets throughout and it seemed to start and run fine prior to restoration.. Plan on checking compression and doing a cold valve adjustment prior to starting her up. Can turn over the crank by hand pretty easily.
Poured a small amount of Marvel Mystery oil in each cylinder this weekend.
Front and rear diffs have been filled.
T-case and transfer case filled.
Fill with engine oil and prime oil pump. I'm thinking Rotella 15-W30.
Install oil filter.
Fresh gas in new OEM tank and all new fuel lines to and from Sniper.
Power steering fluid
Clutch Fluid
Top off brake fluid
Fill with coolant. Any suggestion on how to do this so I fill it up correctly?
Anything I'm missing.
Thanks for any advice or anything I might be missing.
Poured a small amount of Marvel Mystery oil in each cylinder this weekend.
Front and rear diffs have been filled.
T-case and transfer case filled.
Fill with engine oil and prime oil pump. I'm thinking Rotella 15-W30.
Install oil filter.
Fresh gas in new OEM tank and all new fuel lines to and from Sniper.
Power steering fluid
Clutch Fluid
Top off brake fluid
Fill with coolant. Any suggestion on how to do this so I fill it up correctly?
Anything I'm missing.
Thanks for any advice or anything I might be missing.