Power Steering Pump ID (1 Viewer)

[AndersN]

Got a question that I just can’t seem to figure out by searching. I am in the process of replacing the power steering pump on my 1983 FJ43 and have hit a little snag. I got a City Racer Non-US version PS pump a couple months ago but I believe my pump and mount has been swapped for something else. The city racer pump will not fit in my mount but after looking around I believe that a FJ62/FJ70 pump may fit.

Here is the pump I took off

And here are a few shots of the mount

So does anybody know what kind of pump I currently have and would a fj62 pump fit?

Appreciate it!

 

[AndersN]

Tried my best to get a picture of the engraving on the mount.

Also here is the city racer pump next to my mount

 

[69LC]

I have a couple of Fj80 pumps and 3fe brackets I can measure after work if that might help. The bracket you have looks quite similar to them.

 

[AndersN]

I have a couple of Fj80 pumps and 3fe brackets I can measure after work if that might help. The bracket you have looks quite similar to them.

I would really appreciate that!

 

[AndersN]

Removed the mount and found a part number on the back. 44443-60050

Checked with toyodiy

Looks like I will be installing a new FJ62 pump. My old pump looks slightly different on the outside but the internals may be similar. Saw some good rebuild threads for the 62 pump so I may give that a shot to keep as a spare.

 

[69LC]

Sorry for the delay. This is the 3fe fj80 pump and bracket.

 

[AndersN]

Thanks for taking the time to document that. I bet an fj80 bracket and pump would bolt right up. If I had to guess then I think my mounting bracket probably came from a 70 series. I have a new pump on the way so hopefully it will be here this weekend.

 

[69LC]

My plan is to use that bracket and pump on a 2f I hope to rebuild and put into our 72 and use an fj6x box that came off of a front frame cut awhile back.