Power steering high pressure seal (1 Viewer)

[ElPolloBlanco]

Is this the high pressure seal?

 

[retrofive]

Yes.

 

[Milkm4n]

Yes, just installed one yesterday.

 

[Kernal]

Also it's not reusuable so I plan on buying a couple of them before digging into a PS project myself. FWIW.

 

[blkprj80]

The original would have been two copper washers. Make sure you remove the copper washer that will likely be cold welded to the banjo bolt.

 

[ElPolloBlanco]

The original would have been two copper washers. Make sure you remove the copper washer that will likely be cold welded to the banjo bolt.

View attachment 1019323

Thanks for the heads up.

 

[half k cruiser]

Is that an OEM rebuild kit ? I had copper washers with mine but it was a Gates.

 

[ElPolloBlanco]

Is that an OEM rebuild kit ? I had copper washers with mine but it was a Gates.

Yes I used oem. The bearing, high pressure seal, and main pump seal all come separate.

 

[SupraTuRD]

Does anyone have the part number handy for the high pressure seals? Thank you.

 

[Tools R Us]

44327-12010

 

[inkpot]

44327-12010

AFAIK, the double washer is ONLY available from Toyota, so aftermarket kits will still have the two separate copper washers. Albeit a. It more fiddley, they still work just fine. We use both kinds.

 

[SupraTuRD]

44327-12010

Thanks!

 

[OGBeno]

44327-12010

Incorrect.

44327-30030