Power Brake Bleeder for FJ40 (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 30, 2005
Threads
16
Messages
67
Is there a power brake bleeder that will fit the FJ40 Brake Master Cylinder? I have a Motive power bleeder that I used for my Volvo 240 but that one screws on..
Also, is the
O.E.M. Brake Adjusting Tool (for drums) available anywhere for less that $20? I thought i saw it on there for $10 a year ago?
 
Universal Adapter

I use the "universal" adapter (link). Works fine on brake and clutch master.

For adjusting drums, I got a generic tool from NAPA or someplace and ground the blades down so they fit the slots in the Toyota backing plates. I don't remember the exact cost, but it couldn't have been more than a couple of dollars. I've also found that a stubby screw driver works just as well. HTH.
Alfred
 
Thanks CNCFJ40.. If I use the Power Bleeder do I still have to bench bleed the M/C?
 
When I replaced my MC, I did "bench" bleed it in the truck before bleeding the brakes. I'm not sure if it's absolutely necessary, but seems to me it would be easier. My $0.02. HTH
Alfred
 

Users who are viewing this thread

Back
Top Bottom