For Sale PAIR Valve Assembly from 94 FZJ80 (1 Viewer)

[Razorfarmer]

Location

United States

Complete and perfectly working PAIR valve assembly from a 1994 FZJ80 4.5 liter with only 132k on the odometer. Intake hose is dry and slightly cracking as it is original. Vacuum hose is brand new oem toyota. Looking for $70 dollars plus shipping from Arizona, or local pickup.

 

[RidgwayCO]

Complete and perfectly working PAIR valve assembly from a 1994 FZJ80 4.5 liter with only 132k on the odometer. Intake hose is dry and slightly cracking as it is original. Vacuum hose is brand new oem toyota. Looking for $70 dollars plus shipping from Arizona, or local pickup.

View attachment 2383119

View attachment 2383120

Hello, Do you by chance still have this pair system? I only need the valve box. Thank you

 

[fjbj40]

If you can’t find one I have one I removed last spring.

Cheers

 

[Razorfarmer]

Hello, Do you by chance still have this pair system? I only need the valve box. Thank you

I believe so, will check and get back to you later today....Thanks

 

[Razorfarmer]

I believe so, will check and get back to you later today....Thanks

Sent you a private message yesterday. I found the pair valve assembly.

 

[RidgwayCO]

My apologies, I forgot to respond. After speaking with a few more people, I do not think the pair valve is my problem. I am however going to try and do a few more things before I replace it. I'll be in touch. I appreciate your time.

 

[Razorfarmer]

My apologies, I forgot to respond. After speaking with a few more people, I do not think the pair valve is my problem. I am however going to try and do a few more things before I replace it. I'll be in touch. I appreciate your time.

What are your Landcruiser symptoms?

 

[RidgwayCO]

What are your Landcruiser symptoms?

It’s a miss at idle. I’ve thrown every potential part

What are your Landcruiser symptoms?

I have a miss at idle, and an occasional OBD1 code 25 (running lean) at idle that goes away a minute or two once start driving and pick up speed.
I've thrown every part I can think of at it with no resolution. I'm left at valves needing adjustment and injectors. Here's what I've done already: 99% OEM parts

SPARK PLUGS (Gap Checked)

IGNITION COIL

SPARK PLUG WIRES

DISTRIBUTOR CAP & SEAL

DISTRIBUTOR ROTOR

FUEL PRESSURE REGULATOR / O-RING

IDLE AIR CONTROL VALVE & O-RING

VAF REPLACED WITH REBUILT

INTAKE AIR HOSE

PCV VALVE

50% REPLACEMENT OF VACUUM HOSES

OXYGEN SENSORS REPLACED (2)

FUEL FILTER

OIL FILLER CAP

THROTTLE POSITION SENSOR

TIMING CHECKED (4 DEGREES)

SMOKE TESTED VACUUM LINES AT INTAKE (NO LEAKS FOUND)

EGR VALVE CLEANED-TESTED

IDLE CONTROL VALVE PORT CLEANED

EGR MANIFOLD PORT CLEANED IDLE AIR CONTROL PORT CLEANED

 

[Razorfarmer]

It’s a miss at idle. I’ve thrown every potential part

I have a miss at idle, and an occasional OBD1 code 25 (running lean) at idle that goes away a minute or two once start driving and pick up speed.
I've thrown every part I can think of at it with no resolution. I'm left at valves needing adjustment and injectors. Here's what I've done already: 99% OEM parts

SPARK PLUGS (Gap Checked)

IGNITION COIL

SPARK PLUG WIRES

DISTRIBUTOR CAP & SEAL

DISTRIBUTOR ROTOR

FUEL PRESSURE REGULATOR / O-RING

IDLE AIR CONTROL VALVE & O-RING

VAF REPLACED WITH REBUILT

INTAKE AIR HOSE

PCV VALVE

50% REPLACEMENT OF VACUUM HOSES

OXYGEN SENSORS REPLACED (2)

FUEL FILTER

OIL FILLER CAP

THROTTLE POSITION SENSOR

TIMING CHECKED (4 DEGREES)

SMOKE TESTED VACUUM LINES AT INTAKE (NO LEAKS FOUND)

EGR VALVE CLEANED-TESTED

IDLE CONTROL VALVE PORT CLEANED

EGR MANIFOLD PORT CLEANED IDLE AIR CONTROL PORT CLEANED

I'll send you a private message to keep this thread on track....