James Madigan
SILVER Star
im putting in a painless wiring harness.I have the headlights and taillight hooked up and working.There are conflicting instructions from painless, regarding the use of a Toyota flasher or using the 2 flashers that are built into the painless harness and im trying to not hook up hazard lights. I'd like to do that later.
My problem right now is that the left turn signals are working but not the right.I checked the power wire from the flasher and on left turn it pulses and on right turn its steady. This i did with the right light circuit disconnected. Si id o get a steady light on tester when right signal lever is on.
Question#1: Should i use a Toyota flasher instead of the 2 painless ones and then jumper the painless flasher receptacles.?
Question #2 Does this situation sound like its in the column signal switch?
Thanks for any help.
My problem right now is that the left turn signals are working but not the right.I checked the power wire from the flasher and on left turn it pulses and on right turn its steady. This i did with the right light circuit disconnected. Si id o get a steady light on tester when right signal lever is on.
Question#1: Should i use a Toyota flasher instead of the 2 painless ones and then jumper the painless flasher receptacles.?
Question #2 Does this situation sound like its in the column signal switch?
Thanks for any help.