This is kinda turning into my build thread for my bumper. Might make a new thread if yall would perfer. just let me know!
My sister hit something in my cruiser and lost the plastic end cap and bent the hanger for the front bumper. So I decided im going to fabricate a bumper for the front. I have two 6.5 ton crosby shackles, which are displayed in the model (found those on grab cad). I wanted to make sure my design could fit a warn 8274.
I want to add some brush guard tubes like the arb bumpers had, but i figured for now this would do, i want to tuck some lights between the square tubes. So do y'all have any opinions, questions, comments, concerns? Constructive criticism is good when polite, this is my first bumper Ive designed. My goal is quarter inch plate steel for the "box" and quarter inch 2x2 tube.
My sister hit something in my cruiser and lost the plastic end cap and bent the hanger for the front bumper. So I decided im going to fabricate a bumper for the front. I have two 6.5 ton crosby shackles, which are displayed in the model (found those on grab cad). I wanted to make sure my design could fit a warn 8274.
Last edited: