one barrel rebuild (1 Viewer)

[2manycruisers]

I am rebuilding an early one barrel for my '67 fj45 and need some rebuild info on it. My F engine manual shows the later one barrel with the fuel shutoff solenoid. Mine is prior to that, with the big rectangular sight glass for the float. What I need most is float level adjustments and step up rod height. But if anyone can point me to a manual for that carb, that would be great.

thanks,
david

 

[Degnol]

You might PM IDave as he has a couple of 1bbl carbs, but I don't know if they are the "big window" carbs or not. Mark Algazy at Marksoffroad.net is also a 1bbl Guru. You can PM him at 65SWB45.

GL

Ed

 

[treerootCO]

I have that info at home

 

[IDave]

I do have that info, and it is at home as well. Big window carbs rock!

 

[treerootCO]

Wait a minute.....I have that online

http://www.root45.com/tech2.html

Chapter 6 of the F135 repair manual. Specs also on 0-4.

 

[2manycruisers]

Chapter 4, actually. Thanks so much for the link, that's awesome to have online. Thanks also to whoever took the time to scan that. 122 MB! I'm glad I downloaded that at work on a T1, instead of the dialup at home!!

Now to get back to that project.
David

Wait a minute.....I have that online

http://www.root45.com/tech2.html

Chapter 6 of the F135 repair manual. Specs also on 0-4.

 

[Landpimp]

my 66 small window has the fuel cutoff, my 65 big window does not.

 

[2manycruisers]

my 66 small window has the fuel cutoff, my 65 big window does not.

My '67 45 had a rochester or something when I bought it. I got a small window with fuel shutoff and rebuilt it. The step-up rod was missing parts and I got a carb for parts which turned out to be a big window carb. My truck was built in '64 and not wired for a fuel cutoff, so now I'm rebuilding the big window carb to replace the other.

 

[Landpimp]

clear as mud to me

My '67 45 had a rochester or something when I bought it. I got a small window with fuel shutoff and rebuilt it. The step-up rod was missing parts and I got a carb for parts which turned out to be a big window carb. My truck was built in '64 and not wired for a fuel cutoff, so now I'm rebuilding the big window carb to replace the other.

 

[trekker]

Great website treeroot.

 

[2manycruisers]

clear as mud to me

I do my best

Well the FSM gave me float levels, but there is nothing to go by on the step up rod height, only that it should be the length of the tool from the Toyota carb adjustment toolset.
Time to PM Mark or somebody....