Cruiser Jimmy
Moderator
Well, I have undertaken the on board air (OBA) mod for the cruiser, 1992 FJ80. I have purchased a York 210L and will start gathering the rest of the needed items: regulator, oil seprater, guages, tank etc.
My model in this undertaking is Jon Held's diagrams and pictures. Jon can be found on the Yahoo 3FE list.
The biggest task for me is the bracket to hold the York to the engine, I'm going to need to fab it up. This will take several weekend's of taking the smog pump off and taking measurements, placement, belt alignment, etc.
However, if someone out there has a model to benchmark the bracket against then this could be easier!!!
Any thougths or feedback is greatly appreciated.
My model in this undertaking is Jon Held's diagrams and pictures. Jon can be found on the Yahoo 3FE list.
The biggest task for me is the bracket to hold the York to the engine, I'm going to need to fab it up. This will take several weekend's of taking the smog pump off and taking measurements, placement, belt alignment, etc.
However, if someone out there has a model to benchmark the bracket against then this could be easier!!!
Any thougths or feedback is greatly appreciated.