Official ONSC member buying/selling thread (1 Viewer)

SFROMAN

SILVER Star
Joined
Jun 30, 2009
Messages
1,979
Visit site
I am going to try to get rid of some of my projects. Just planning on going in a different direction.

I have 2 71 FJ40s for sale.

white 71 40 is not running the back half of the tub is rusty it comes with a whole other rolling frame and back half of a tub- $2800

my other 40 runs perfect is a little dented but is registered and insured comes with a metal roll cage kit that u will have to weld up and install
A bunch of other parts like engine stuff. The transfer case has also been recently built with almost no miles since it was rebuilt. It had a dented windshield frame which I replaced. But needs to be color matched. I have the top sides but are bent up feom when it was rolled. I also have rear sill and rear quarter panel replacement metal pieces to replace the rusty areas. I am asking $8000 for it.

Rear 80 axle for sale open diff. rust free complete axle
(FRONT AXLE SOLD)

I have an 80 rear axle third. Make me an offer.

(SOLD )82 short bed first gen Toyota $1000

(PENDING) old man emu for first gen Toyota less than 300 miles on it $1300

(SOLD) 33 BFG all terrains 33x11.50x15 mounted and balanced on first gen Toyota truck rims. Fairly new tires, more than half life on them. $500 (Ryan has dibs on these)

If you really are not interested. Please don’t waste my time. I am super busy which is why I am getting rid of some of my projects. Hit me up if you are interested. I will leave this add here for a week and then move it to other places if the club is not interested.
 
Last edited:

White Sheep

SILVER Star
Joined
Dec 3, 2019
Messages
945
Location
Cameron, NC
Visit site
Put my baby up for sell just now. Im sure no one is interested in buying this, but I listed it for $40K, but $37 for club members.

Procharged (Supercharged) 2015 Dodge Scat Pack Shaker. 11K on the clock.

20210317_171934.jpg
20210317_171754.jpg

20210317_171904.jpg


20210317_172222.jpg


20210317_171654_HDR.jpg
 

afgman786

SILVER Star
Joined
Feb 19, 2013
Messages
3,609
Location
Gainesville, VA
Visit site
Joined
Oct 16, 2018
Messages
199
Location
Greenville, SC
Visit site
I am going to try to get rid of some of my projects. Just planning on going in a different direction.

I have 2 71 FJ40s for sale.

white 71 40 is not running the back half of the tub is rusty it comes with a whole other rolling frame and back half of a tub- $2800

my other 40 runs perfect is a little dented but is registered and insured comes with a metal roll cage kit that u will have to weld up and install
A bunch of other parts like engine stuff. The transfer case has also been recently built with almost no miles since it was rebuilt. It had a dented windshield frame which I replaced. But needs to be color matched. I have the top sides but are bent up feom when it was rolled. I also have rear sill and rear quarter panel replacement metal pieces to replace the rusty areas. I am asking $8000 for it.

have some 80 axles for sale make me an offer.

I have an 80 rear axle third. Make me an offer.

82 short bed first gen Toyota $1000
(Ryan has dibs


old man emu for first gen Toyota less than 300 miles on it $1300 (Ryan has dibs on these)

33 BFG all terrains 33x11.50x15 mounted and balanced on first gen Toyota truck rims. Fairly new tires, more than half life on them. $500 (Ryan has dibs on these)

If you really are not interested. Please don’t waste my time. I am super busy which is why I am getting rid of some of my projects. Hit me up if you are interested. I will leave this add here for a week and then move it to other places if the club is not interested.
@IcutYourCruiser

axles
 
Joined
Sep 13, 2014
Messages
1,394
Location
Huntsville, AL
Visit site
I am going to try to get rid of some of my projects. Just planning on going in a different direction.

I have 2 71 FJ40s for sale.

white 71 40 is not running the back half of the tub is rusty it comes with a whole other rolling frame and back half of a tub- $2800

my other 40 runs perfect is a little dented but is registered and insured comes with a metal roll cage kit that u will have to weld up and install
A bunch of other parts like engine stuff. The transfer case has also been recently built with almost no miles since it was rebuilt. It had a dented windshield frame which I replaced. But needs to be color matched. I have the top sides but are bent up feom when it was rolled. I also have rear sill and rear quarter panel replacement metal pieces to replace the rusty areas. I am asking $8000 for it.

have some 80 axles for sale make me an offer.



82 short bed first gen Toyota $1000
(Ryan has dibs


old man emu for first gen Toyota less than 300 miles on it $1300 (Ryan has dibs on these)

33 BFG all terrains 33x11.50x15 mounted and balanced on first gen Toyota truck rims. Fairly new tires, more than half life on them. $500 (Ryan has dibs on these)
I am going to try to get rid of some of my projects. Just planning on going in a different direction.

I have 2 71 FJ40s for sale.

white 71 40 is not running the back half of the tub is rusty it comes with a whole other rolling frame and back half of a tub- $2800

my other 40 runs perfect is a little dented but is registered and insured comes with a metal roll cage kit that u will have to weld up and install
A bunch of other parts like engine stuff. The transfer case has also been recently built with almost no miles since it was rebuilt. It had a dented windshield frame which I replaced. But needs to be color matched. I have the top sides but are bent up feom when it was rolled. I also have rear sill and rear quarter panel replacement metal pieces to replace the rusty areas. I am asking $8000 for it.

have some 80 axles for sale make me an offer.

I have an 80 rear axle third. Make me an offer.

82 short bed first gen Toyota $1000
(Ryan has dibs


old man emu for first gen Toyota less than 300 miles on it $1300 (Ryan has dibs on these)

33 BFG all terrains 33x11.50x15 mounted and balanced on first gen Toyota truck rims. Fairly new tires, more than half life on them. $500 (Ryan has dibs on these)

If you really are not interested. Please don’t waste my time. I am super busy which is why I am getting rid of some of my projects. Hit me up if you are interested. I will leave this add here for a week and then move it to other places if the club is not interested.
33-11.50? Is this correct? If they are 33 10.50 I’d take them off you.
 

FJ Noob

GOLD Star
Joined
Aug 22, 2019
Messages
1,006
Location
Fayetteville, NC
Visit site
I am going to try to get rid of some of my projects. Just planning on going in a different direction.
......have some 80 axles for sale make me an offer.

Del... one of those axles doesn't happen to be a rear housing with diff lock? Don't need a working locker, just keeping an eye out for a *better* housing.
 

mwalls54

Cruiser Nutjob
SILVER Star
Joined
Dec 4, 2003
Messages
2,659
Location
Roanoke, VA
Visit site
I am going to try to get rid of some of my projects. Just planning on going in a different direction.

I have 2 71 FJ40s for sale.

white 71 40 is not running the back half of the tub is rusty it comes with a whole other rolling frame and back half of a tub- $2800

my other 40 runs perfect is a little dented but is registered and insured comes with a metal roll cage kit that u will have to weld up and install
A bunch of other parts like engine stuff. The transfer case has also been recently built with almost no miles since it was rebuilt. It had a dented windshield frame which I replaced. But needs to be color matched. I have the top sides but are bent up feom when it was rolled. I also have rear sill and rear quarter panel replacement metal pieces to replace the rusty areas. I am asking $8000 for it.

have some 80 axles for sale make me an offer.

I have an 80 rear axle third. Make me an offer.

82 short bed first gen Toyota $1000
(Ryan has dibs


old man emu for first gen Toyota less than 300 miles on it $1300 (Ryan has dibs on these)

33 BFG all terrains 33x11.50x15 mounted and balanced on first gen Toyota truck rims. Fairly new tires, more than half life on them. $500 (Ryan has dibs on these)

If you really are not interested. Please don’t waste my time. I am super busy which is why I am getting rid of some of my projects. Hit me up if you are interested. I will leave this add here for a week and then move it to other places if the club is not interested.
80 axles full float? I don’t need 3rd members
 

SFROMAN

SILVER Star
Joined
Jun 30, 2009
Messages
1,979
Visit site
Rear 80 axle is full float, non locked complete axle. Came out of a 97 lx450. Buddy and I pulled it from a pick and pull. I will need no less than $450 for it.
(SOLD) The 80 front axle was pulled from same vehicle. It is not locked, It is missing the inner axle shafts. Complete other wise.

both in perfect shape. Zero rust.

I will post up photos of the 40s in a bit. I have a bunch of photos of the white 40 in my profile photos.
 
Last edited:
Joined
Dec 27, 2017
Messages
211
Location
NC
Visit site
(4) Goodyear AT Kevlar tires - 265/70/16

These only have about 2k miles (all highway) on them and are in excellent condition, ride great and are like new. They are the factory AT tire for the Toyota TRD. I simply want to replace them with white letter MT’s is the only reason for selling. I will take $315 for all 4. (Wheels are NOT included). Thanks!
F4CE72F8-43F8-4251-964F-2D13C5EA2DBB.jpeg
 

jamesurq

Reefmonkey
Supporting Vendor
Joined
Apr 18, 2015
Messages
6,395
Location
Greensboro, NC
Website
reefmonkey.com
I have a working Bellevue winch that someone had claimed dibs on about a year ago. Cant remember who... sorry. If it was you, send me a note. Otherwise I’m going to offer it to the next person that wants it for what I paid - $500
 
Joined
Nov 12, 2017
Messages
444
Location
North Carolina
Visit site
Just came across a very impulse but amazing buy lol, Need some parts for 84-85 solid axle toyoa stuff.
-Toyota Solid Axle High-Steer
-Lift Springs/Shackles
-Front Axle Rebuild
-IFS Steering Box Mount
any other parts might interest me.
 

Users who are viewing this thread

Top Bottom