O ring for saginaw pump (1 Viewer)

Joined
Feb 4, 2008
Messages
515
Location
Ojai California
Hey guys,..I have gathered all the parts for my saginaw upgrade,..and got my parts out that I got from Advance Adapters, quite a while ago,..I got an AGR pump and box,..
the pump comes without the low pressure tank,...and unless I misplaced it,...the big O-ring that seals the tank to the pump, was not included...does anyone know where I can get just the O-ring? I also noticed that Advance Adapters of Paso Robles, is not listed as a vender anymore?????
 

Poser

Oh...Durka Durka Durka.
s-Moderator
Supporting Vendor
Joined
Oct 1, 2003
Messages
20,451
Location
MN
 
 
 
Check around, it should have been with the pump. Every Saginaw pump I have received from AGR the o-ring for the reservoir was included.

Call a NAPA; they sell the pump with or without the reservoir. Perhaps they have it or have a part number for it.

Tell them you have a 1975 Impala.

Or call AGR and have another one sent.

:meh:
 
Joined
Feb 4, 2008
Messages
515
Location
Ojai California
Check around, it should have been with the pump. Every Saginaw pump I have received from AGR the o-ring for the reservoir was included.

Call a NAPA; they sell the pump with or without the reservoir. Perhaps they have it or have a part number for it.

Tell them you have a 1975 Impala.

Or call AGR and have another one sent.

:meh:

Thanks Steve,..I found the instructions,..and I'm sure it was included, but a lot of water has passed under the bridge since I started buying all this stuff and I guess it just got misplaced.:cheers:
 

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

Top Bottom