Nv4500 to 1fz-fe adapter (1 Viewer)

[toastyjosh]

I did a search and found a thread, that said "There are adapters to mount a NV4500 manual to the 1FZFE but nothing for the transfer case to the NV4500... "
Trans Swap I am looking into.

Now can anyone tell me where this NV4500 to 1fz-fe adapter is ?

 

[NLXTACY]

Lots more development goes into this vs trans to transfer. But...it’s on the list

 

[Sc0-]

The NV4500 to HF2AV is done courtesy of WitsEnd...

 

[NLXTACY]

The NV4500 to HF2AV is done courtesy of WitsEnd...

Perfect place for a link

Engine Conversion Kit- Dodge NV4500 to Toyota HF-2A

Engine Conversion Kit- Dodge NV4500 to Toyota HF-2A (ECK-1)

absolute-wits-end.com

 

[baldilocks]

Adapting an NV4500 or NV 5600 manual to the 1fz opens the doors to whatever can be imagined behind the stock mill.

 

[shocktower]

Adapting an NV4500 or NV 5600 manual to the 1fz opens the doors to whatever can be imagined behind the stock mill.

NV5600 will never fit without major body mods

 

[baldilocks]

NV5600 will never fit without major body mods

I wondered about that. Thanks

 

[Seth S]

I know this is an older thread. Worth dropping a question.

Got a link for an adapter for the nv4500 to 1fzfe? My googling didn’t turn up any hits

 

[cruisermatt]

I know this is an older thread. Worth dropping a question.

Got a link for an adapter for the nv4500 to 1fzfe? My googling didn’t turn up any hits

It doesn’t exist

It can, but it doesn’t right now

 

[Seth S]

It doesn’t exist

It can, but it doesn’t right now

ok. One of these threads made it sound like that adapter existed but no adapter for the transfer case. However I found a lot of adapters for the t case and none for the engine

 

[BakerFJ]

I'd be able to make this happen if I had dimensions haha. Otherwise I'd have to pull apart my rig to find out for myself and that's a lot of work on a running truck to simply poke around with my caliper.
On the long-long-term list of things to do

 

[tmxmotorsports]

The adapter plate and machined shaft exists not sure about the adapter to the engine...
And do not try to do this swap unless your ready to do some major fabrication work.
Tommy

 

[BakerFJ]

The adapter plate and machined shaft exists not sure about the adapter to the engine...
And do not try to do this swap unless your ready to do some major fabrication work.
Tommy

View attachment 3309087

View attachment 3309088

View attachment 3309089

View attachment 3309090

Sir, I'll have you know I'm a glutton for punishment. When does any automotive work realllllly go smoothly? beautiful work!

 

[thatcabledude]

The adapter plate and machined shaft exists not sure about the adapter to the engine...
And do not try to do this swap unless your ready to do some major fabrication work.
Tommy

View attachment 3309087

View attachment 3309088

View attachment 3309089

View attachment 3309090

Which bellhousing is that?

 

[tmxmotorsports]

Which bellhousing is that?

Gm

 

[tmxmotorsports]

Sir, I'll have you know I'm a glutton for punishment. When does any automotive work realllllly go smoothly? beautiful work!

Thanks there's more

 

[cruisermatt]

Which bellhousing is that?

that's the standard GM 2500/3500 00-06 NV4500 Bellhousing

 

[cruisermatt]

one could stack all these adapters to puta NV4500 in their FZJ80 behind the 1FZ. But for similar cost could order up a brand new H152 and necessary parts and get very similar result, shifter in correct location, no adapters, probably nicer shift quality, quieter operation, etc

FJCO 1FZ-H55F Bell Housing

*Made on demand. Ships 3-4 weeks from order. The FJCO 1FZ to 5-speed Manual Transmission Bell Housing is the solution for enthusiasts who have dreamed of a manual transmission behind their 1FZ engine! Users can mate our bell housing to the readily-available, and proven, Toyota H55F 5-speed...

store.fj.co

FJ40 FJ45 Bell Housing Adapter Conversion LC 6 Cylinder to DODGE HD NV4500 5 Speed Manual Transmission 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984 - BTB Products - Land Cruiser Restoration and Parts

THIS ADAPTER ASSEMBLY IS USED TO ADAPT THE DODGE HD NV4500 TRANSMISSION TO THE TOYOTA LAND CRUISER 6-CYLINDER ENGINE. THE ADAPTER KIT USES THE FACTORY 4-SPEED OEM BELL-HOUSING.

btbprod.com

Transmission Conversion Plate Kit- Dodge NV4500 to Toyota HF-2A

Transmission Conversion Plate Kit- Dodge NV4500 to Toyota HF-2A (ECK-2)

absolute-wits-end.com

 

[vipergrhd]

The adapter plate and machined shaft exists not sure about the adapter to the engine...
And do not try to do this swap unless your ready to do some major fabrication work.
Tommy

View attachment 3309087

View attachment 3309088

View attachment 3309089

View attachment 3309090

What a beautiful drivetrain, I used to fix a lot of those 5th gear still a great transmission. Maybe someday when I stop bleeding Benjamins.

 

[tmxmotorsports]

one could stack all these adapters to puta NV4500 in their FZJ80 behind the 1FZ. But for similar cost could order up a brand new H152 and necessary parts and get very similar result, shifter in correct location, no adapters, probably nicer shift quality, quieter operation, etc

FJCO 1FZ-H55F Bell Housing

*Made on demand. Ships 3-4 weeks from order. The FJCO 1FZ to 5-speed Manual Transmission Bell Housing is the solution for enthusiasts who have dreamed of a manual transmission behind their 1FZ engine! Users can mate our bell housing to the readily-available, and proven, Toyota H55F 5-speed...

store.fj.co

FJ40 FJ45 Bell Housing Adapter Conversion LC 6 Cylinder to DODGE HD NV4500 5 Speed Manual Transmission 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984 - BTB Products - Land Cruiser Restoration and Parts

THIS ADAPTER ASSEMBLY IS USED TO ADAPT THE DODGE HD NV4500 TRANSMISSION TO THE TOYOTA LAND CRUISER 6-CYLINDER ENGINE. THE ADAPTER KIT USES THE FACTORY 4-SPEED OEM BELL-HOUSING.

btbprod.com

Transmission Conversion Plate Kit- Dodge NV4500 to Toyota HF-2A

Transmission Conversion Plate Kit- Dodge NV4500 to Toyota HF-2A (ECK-2)

absolute-wits-end.com

Would definitely recommend that ... shifter location with nv4500 and 1fz I'm not sure of but shifter location with ls and nv4500 no where near close I will say this I doubt anyone will ever see the swap I'm currently doing ever again lot but you don't have to take my word on it feel free to try.