Non-us distributor install issue (1 Viewer)

ToyotaMatt

Factory Focus-Point Mind-Set Approach
Supporting Vendor
GOLD Star
Joined
Aug 12, 2007
Messages
14,478
Location
EAST COAST
This is a 1984 3F. AU Spec . FSM

This is indeed the 61180 dizzy w/o octane selector option

I will post the entire dizzy section for everyone to expand there minds and tech on this topic

When I first encountered the 3mm gap I freeked out this unique 3F non USA FSM guided me to home base and eased my mind after all it was a clients shop job back then and not my own land cruiser so mission critical everything had to be everything

Focus on 2nd to last page the dizzy install procedure FSM steps

Interesting to say the least

F8CB3307-CAB3-488F-9598-7796328E1F01.jpeg


9259C83A-E157-4692-908C-4E282CBCF606.jpeg


39564A4B-34FF-4C56-87EC-955A6A5E2BF5.jpeg


46F605EF-7D3B-437A-ADAE-911855273944.jpeg


A42CD0F2-1B00-4C86-B3F3-1E8149EB75A4.jpeg
 

FJ40Jim

The Cruiser Whisperer
SILVER Star
Joined
Sep 26, 2003
Messages
11,135
Location
Lancaster, Ohio, USA
The dissys with a drive pin BELOW the gear, seat the gear on the top of the oil pump. They do not register on the block.

If drive pin is above the gear, dissy seats on top face of engine block. Gear floats above oil pump.
16163396583193499260220136860471.jpg
 

Users who are viewing this thread

Top Bottom