Hello,
I have no power, it takes 3 or 4 minutes to get to 35 MPH, it was sort of intermittent and I thought it might be bad fuel but that didn't turn out to be true. I noticed the top cable (the one with the little stop on it) was off out of the channel where the throttle cable tracks over the cam shaped part. I put it back in place and all the sudden had all the power back. Then on the same test drive after stopping at a stop sign, it went back to no power. I placed a zip tie (to temporarily see if that slipping off was really it) and it went back to no power still. My question (because I can't find the info in my Toyota Manual) is: should the housing for the top cable which routes over to my computer I think, be longer so there isn't so much bare cable? Could this adjustment be my problem?
I have no power, it takes 3 or 4 minutes to get to 35 MPH, it was sort of intermittent and I thought it might be bad fuel but that didn't turn out to be true. I noticed the top cable (the one with the little stop on it) was off out of the channel where the throttle cable tracks over the cam shaped part. I put it back in place and all the sudden had all the power back. Then on the same test drive after stopping at a stop sign, it went back to no power. I placed a zip tie (to temporarily see if that slipping off was really it) and it went back to no power still. My question (because I can't find the info in my Toyota Manual) is: should the housing for the top cable which routes over to my computer I think, be longer so there isn't so much bare cable? Could this adjustment be my problem?