Wanted NM Screws for Rear Hatch Linkage - '71 FJ40 (1 Viewer)

[4Cruisers]

Location

United States

Looking for six NLA screws for my '71 FJ40 build. Toyota Part Number 93180-16016. M6 X 1.0 pitch X 16mm long - 10mm hex head with screwdriver slot. Used in the rear lift gate linkage, parking brake handle bracket at dash, and transfer case lever bracket at dash.

 

[DesertFJ40]

Not sure about finding a slotted hex bolt in that size, but the ACE hardware stores in my area sell the correct pitch 10mm bolts that fit into the fj40s. Different lengths as well. I've used them in my 71' with no problem ..... Perhaps you could always grind in a screwdriver slot into them if you really needed

 

[kevos37]

They look like the bolts off older FJ40 engine side covers. And transmission covers too.

 

[ToyotaMatt]

Looking for six NLA screws for my '71 FJ40 build. Toyota Part Number 93180-16016. M6 X 1.0 pitch X 16mm long - 10mm hex head with screwdriver slot. Used in the rear lift gate linkage, parking brake handle bracket at dash, and transfer case lever bracket at dash.

View attachment 2104630

Please confirm your 16mm Long overall measurement ?

Top of head to bottom of threads

or

Bottom of shoulder to bottom of threads ?

 

[4Cruisers]

Please confirm your 16mm Long overall measurement ?

Top of head to bottom of threads

or

Bottom of shoulder to bottom of threads ?

Length below the head is 16mm. A longer screw of the same type would work also.

 

[ToyotaMatt]

Length below the head is 16mm. A longer screw of the same type would work also.

mine are shorter , 16mm for top of head to bottom of threads / shaft / overall O/D



But .....................

Here’s what I have , and your welcome to

them , there’s no cost involved and I will

cover the shipping out to Ya as well ...

Shoot me a PM with shipping instructions