SOLD NISSAN PATROL TNK WIPER MOTOR & ARM PAIR (1 Viewer)

scoobiedubes

SILVER Star
Joined
Aug 12, 2010
Messages
1,246
Location
Phoenix, AZ
I bought this set thinking I might use them for the FJ28 build a while back, but ended up finding the vacuum wipers it needed so they’re available now. NOTE THAT THESE ARE DIFFERENT FROM THE 40 SERIES WIPERS! They were for a 1960s Nissan Patrol, they’re larger than the 40 series ones and the shaft diameter is wider. Also one of the motors is missing a switch. $200 plus shipping. If anybody needs dimensions I can try to take some tomorrow

BC814C4C-1EF6-42E2-B086-79994D2C0DCE.jpeg


BCD33A6D-66DD-4AF9-9D4B-8075CBACE93C.jpeg


167FEF7B-7612-4B8A-9EA4-81482E625DD5.jpeg


D7537B4B-3938-4648-968F-2FE99FA5B427.jpeg


E0E58496-A699-4875-A67C-024D23A3DDEF.jpeg
 

Bear

SILVER Star
Joined
Nov 2, 2005
Messages
2,673
Location
California
Sorry, not a buyer, but......................Interesting variation from TNK. Without the Land Cruiser third wire, do they have internal wiring that provides a "Park" function? Also wondering if the Phillips(crosspoint) screw heads indicate mid-to-late sixties manufacture?

GLWS
 

scoobiedubes

SILVER Star
Joined
Aug 12, 2010
Messages
1,246
Location
Phoenix, AZ
Here’s some comparison photos. Probably 10% bigger than the 40 series TNKs. The shaft diameter is 8mm vs the 6mm on the 40 series ones.

702F2407-107A-4CCF-97FD-BA7F1FB83FBB.jpeg


CA464BF8-41A7-4CDF-B377-1906803BD45A.jpeg


3F0815AC-4241-4D10-8137-D772E4EADC7C.jpeg


69D01C51-99E2-47C3-B51C-17A1192B09B3.jpeg


694466EF-81A2-465A-98D3-C875B210496E.jpeg
 

Users who are viewing this thread

Top Bottom