Clubtroy
SILVER Star
Anybody have a good way to reattach one of the wires to the resistor on the blower motor? Soldering was a no go and the plastic encapsulation makes it fun. Guess I'll buy a used motor on the classifieds...hopefully.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Thank you Sir!Here's a couple threads:
heater blower motor resistor
anyone know what the resistance is of the heater blower motor resistor?(mine had the inner bolt rust and expand to the point it cracked open the ceramic resistor-now no low speed) These resistors are nowhere to be found-thought I could get a Radio-shack replacement--forum.ih8mud.com
Blower Motor Resistor
Has your heater blower lost the "low" fan speed setting? If so, you probably need to replace your blower motor resistor. Here is what I used to replace mine. It is a Vishay/Dale Wirewound Power Resistor part# HL-50-06Z 1 OHM 5% 50W You can purchase it here for $3.38. They also sell...forum.ih8mud.com
Good writeup by coolerman
Front Heater Fun
www.globalsoftware-inc.com