Hello, I have a 1972 fj40 imported from Nicaragua, I had a 3F engine installed over there, I removed the original oil pan but it was damaged, therefore I bought a brand new one the last updated, OEM 013 the last digit from part number, however it does not fit, I opened the baffling plate but still, please advice.
New oil pandoes not fit 3f engine (1 Viewer)
- Thread starter romanpharmd
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
12101-61013 is the incorrect part number. That's for a 2F engine.
You need 12101-61030.
- Thread starter
- #3
Sorry, the part I bought is 12101-61030
- Thread starter
- #4
Does fit, however bolt holes align, but it does not set flat with gasket, about 1 inch, does not gois in.
Well then... are you sure you have a 3F block? You might have an earlier block which would be the same as a 2F block and actually require the 12101-61013 Pan.
Looks like you might be reversed
Looks like you might be reversed
- Thread starter
- #6
The engine came from 3f 1991, oil pan needed is 12101-61050
You should have posted that all in the first post.
12101-61050 is discontinued from Toyota.
- Thread starter
- #8
Thanks for your help.
