- Location
- United States
So I have decided that I will stick with my carbureted engine and not go EFI.
So my AFI setup is for sale.
This is brand new and comes with everything from AFI including the DUI distributor and a bunch of extras.
List
AFI kit
DUI distributor from AFI for this kit (have the box it was shipped in to)
Black Live Wires
2 x Airtex fuel pump, one shown (correct for the TBI) as the AFI is suspect
FJ62 fuel pump block off plate
Lokar 36" throttle cable with a spare cable
Earls 5/16 EFI vapor guard hose 10'
EFI rated hose clamps
TBI riser to air cleaner adapter
TBI adapter (need to remove internal bars on top) to air cleaner.
FJ62 gas pedal (was planning on modifying to use and keep the hand throttle)
FJ80 throttle cable (this will work with an FJ62 pedal and the TBI)
Jegs 40 micron before fuel pump 6an filter (+ extra screens) (JEGS 15031: Compact Billet In-Line Fuel Filter -6AN Male/Female | JEGS)
2 x -6an - 5/16 hose adapters for filter.
Price paid for everything $1700.
Your price $1000 Shipped.
For the week of March 3-9 I will throw in a Downey Header (see pic below has been sand blasted and needs paint) the splater on this was a bit of cleaner I splattered, I will wipe down with Pre paint prep before shipping, + collector adapter (not shown) with o2 connection (JEGS 30010: Steel Reducers with O2 Fittings 2-1/2" to 2-1/4" OD | JEGS).
New manifold gaskets (Remflex kit) + all clamps etc.
That is less than at AFI just for the initial kit and not the extras and still less that a Holley Sniper or FItech setup (add the fuel pump, hoses, riser, cables etc you easily hit $1500 on these kits and that is without an electronically controlled distributor).
So my AFI setup is for sale.
This is brand new and comes with everything from AFI including the DUI distributor and a bunch of extras.
List
AFI kit
DUI distributor from AFI for this kit (have the box it was shipped in to)
Black Live Wires
2 x Airtex fuel pump, one shown (correct for the TBI) as the AFI is suspect
FJ62 fuel pump block off plate
Lokar 36" throttle cable with a spare cable
Earls 5/16 EFI vapor guard hose 10'
EFI rated hose clamps
TBI riser to air cleaner adapter
TBI adapter (need to remove internal bars on top) to air cleaner.
FJ62 gas pedal (was planning on modifying to use and keep the hand throttle)
FJ80 throttle cable (this will work with an FJ62 pedal and the TBI)
Jegs 40 micron before fuel pump 6an filter (+ extra screens) (JEGS 15031: Compact Billet In-Line Fuel Filter -6AN Male/Female | JEGS)
2 x -6an - 5/16 hose adapters for filter.
Price paid for everything $1700.
Your price $1000 Shipped.
For the week of March 3-9 I will throw in a Downey Header (see pic below has been sand blasted and needs paint) the splater on this was a bit of cleaner I splattered, I will wipe down with Pre paint prep before shipping, + collector adapter (not shown) with o2 connection (JEGS 30010: Steel Reducers with O2 Fittings 2-1/2" to 2-1/4" OD | JEGS).
New manifold gaskets (Remflex kit) + all clamps etc.
That is less than at AFI just for the initial kit and not the extras and still less that a Holley Sniper or FItech setup (add the fuel pump, hoses, riser, cables etc you easily hit $1500 on these kits and that is without an electronically controlled distributor).
Last edited: