Wanted Need New Manifold (1985 FJ60)

[rwb1616]

Location

United States

Hi Guys,

So my manifold is cracked (cylinder 5), and I'm trying to track down a used one for my 1985 FJ60. Any suggestions? I'm on the east coast, so ideally it would be somewhere on this side of the county, but I guess I can't really be too picky.

Thanks for the help.

 

[John Smith]

Hi Guys,

So my manifold is cracked (cylinder 5), and I'm trying to track down a used one for my 1985 FJ60. Any suggestions? I'm on the east coast, so ideally it would be somewhere on this side of the county, but I guess I can't really be too picky.

Thanks for the help.

You will have better luck if you post up in the Classifieds section under Parts Wanted. I am sure you can find one for sale under the Parts for Sale section or Parting Out section.

 

[sl33py]

have you pulled it and checked if a good shop can weld it? Or check with cruiserparts . net - they are on east coast, not sure how close.

GL!

rob

 

[klinetime574]

I have my intake manifold off my '84 and two exhaust manifolds. One from mine and the other from and 85 I found at the junkyard. My intake manifold is cracked, and I am uncertain on the condition of the exhaust manifolds.

PM me if interested.

Thanks

 

[3_puppies]

Hi Guys,

So my manifold is cracked (cylinder 5), and I'm trying to track down a used one for my 1985 FJ60. Any suggestions? I'm on the east coast, so ideally it would be somewhere on this side of the county, but I guess I can't really be too picky.

Thanks for the help.

so you just want the center section?? I've got 2 of them on the shelf, $20 plus shipping?

 

[ginericLC]

I have a set that are still mated. A lot of times after they are separated they don't seal up correctly. I'm in Idaho but I could easily ship them. But you might be a few extra days due to the holiday weekend.

 

[rwb1616]

Thanks for the help, and the move over to Parts Wanted

 

[rwb1616]

I have a set that are still mated. A lot of times after they are separated they don't seal up correctly. I'm in Idaho but I could easily ship them. But you might be a few extra days due to the holiday weekend.

Thanks Eric. This sounds like what I would need. I have a call into Cruiserparts.net b/c they have this as well for $250. Waiting to hear back from them to see what they say but might be in touch soon. Thanks...