need locker advice for '74 FJ40

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 4, 2008
Threads
49
Messages
557
Location
Ojai California
Hey guy's, I have a '74 FJ40 and would like to install lockers but there are so many options (and they all say they are the best) and I'd like to do it right the first time.
I see adds for Auburns, Powertrax, Detroit lockers, ARB's, and limited slip, I have a 4" lift kit, discs in front, saginaw PS, stock F except for fuel injection and headers 4 SPD (plan to upgrade with ORION or? ) and am going to be running 35" tires.
Could you guy's please offer advice on choosing lockers for front and rear? I plan to go on weekend runs with my club, but no really hardcore stuff,..ok? Thanks in advance Randy
 
what kind of price range are you looking at. ARB's are really nice, but really $$$.

Seems that a lot of people run Aussie Lockers or other forms of automatic lockers with success. There have been some pretty good threads on lockers in the past. I will search and see what I find.

Pretty much your question
https://forum.ih8mud.com/40-55-series-tech/204938-i-need-first-hand-info-locker-my-fj40.html

Another
https://forum.ih8mud.com/40-55-series-tech/193088-lockers.html

and one more for good measure.
https://forum.ih8mud.com/40-55-series-tech/113823-fj-40-locking-diffs.html

I hope those help. I will probably go with arb's whenever I grow up and start making money. Till then a college budget and next on the list is metal teching my stuff. Need to learn to weld first...
 
Last edited:
ARBs on 2 trucks. They are excellent. It's true, thay can be fiddly, but given the strength and the transparent nature of their operation, they are the best option for a street driven truck. I've had the set on my 40 for 8 years now. I did have them resealed last year since I had the axles apart when doing a spring over.

Claudia-Amazing a set over 20 years old. You never had to replace the inner o-rings? That's prety cool.
 
Last edited:
Go with the Detroit lockers, they never fail. You do not need all that extra stuff to make them work. They are locked or they are not locked. With ARB's there are to many little things that can go wrong. You have to always worry about not snaging an air line, maybe the fittings are losse. Just to many things to worry about for me. I have always ran Detroits in all my rigs, THEY WORK GREAT ! ! ! ! ! Yes with no power steering the front will be hard to trun when locked, but thats with any locker you use. ARB, Detroit, ect... Good luck. I you need a great price on any locker please call me and I will be glad to help you out.
My cell number: 678-873-0373. Thanks. Stephen
 
Skip the Auburn. It is a limited slip and not a locker.

Since you plan on 35 inch tiers and don't anticipate much "hardcore" stuff at the moment, I suggest you start out with a "lunch box" locker (Lockrite, Aussie, EZ) in the rear axle and see if you like it. If you adjust your driving style, you won't notice it on the street. If not, it will pop, bang and jerk, which won't hurt the locker, but you may find it annoying.

If you like it and want to do more rock crawling add another locker in the front. If you don't like it, you can put an ABR in the back or just remove the locker and go back to stock and sell your locker.

A rear auto locker is probably the best bang for your buck in terms of off road performance.
 
I have a aussie in the rear of my 78, at first it would pop and lurch a little, but for the most part its quiet around town, i've just learned to drive it much different than my acura. i think i paid $275, was easy to install, (thanks to camcruiser). i then had to pull the rear axle bearings and i removed and reinstalled it about six months ago, since i am not a mechanic its actually pretty simple. IMO its a huge upgrade for such a cheap price, best $275 i've spent
 
'74 FJ40 made decision on locker (I think)

Hi guy's thanks for the answers to my earlier post. I'm going to SOR tomorrow (I have a credit) and plan to get a Detroit Locker for the rear and will wait on the front until I get my P S done.
Randall
 
What Poser said. If you break a shaft you break the Detroit. My buddy broke his front 35 spline d60 Detroit this weekend with no shaft failure :confused: That said, my next setup will be spooled rear, Detroit front because I am a minimalist :D
 
If you are going to go for the original Detroit (not the EZ lunchbox locker), then you will need an installation kit too (bearings, seals, gaskets etc) and you will need to pay someone to install it.

For a few $$ more you might want to consider changing the gears to 4.56s or 4.88s to be compatible with the larger tires. For a few $$ more, you could have a selectable ARB.

Best to do something like this once and do it right.
 
thank's PINHEAD, I guess my logic was that SOR doesn'y carry ARB's and I have a credit there. So I was going to go Detroit locker in the rear,...Hmmmmmm (sigh)
 
P S guy's would you think 4:56's and 35's would run down the highway about like stock gears and tires??
 
I see no mention of snow, mud off camber. In my experience, auto lockers in the snow can be much worse than no lockers at all. If there's no snow where you live, it doesn't matter. We don't get much, unfortunately...

Nevermind, I just looked up the area in CA. No snow there...
 
math dood

(35-28)/35 = .2
(4.56-4.11)/4.56 = .098

.2 not equal to .098 answer no
it will lower your rpm on the highway which is good or bad, 4.88s will get you closer to stock

revs at 75mph for 4.11s/28" will be 3700rpm
for 4.56/35" 3284rpm
 
Last edited:
Thanks BUSTANUTLEY, (did you think that name up, or was it assigned due to an accident) OUCH
 
Claudia-Amazing a set over 20 years old. You never had to replace the inner o-rings? That's prety cool.

1989 - 2008 = 19 years :confused: :flipoff2:

I haven't had to replace them; maybe some PO - truck has been in dry climate all its life (as far as I can tell from stickers :D)

my compressor may be on the outs, though.... I am getting three locks out of it, then it recharges

but everything worked fine at Cruise Moab :flipoff2:
 
1989 - 2008 = 19 years :confused: :flipoff2:

I haven't had to replace them; maybe some PO - truck has been in dry climate all its life (as far as I can tell from stickers :D)

my compressor may be on the outs, though.... I am getting three locks out of it, then it recharges

but everything worked fine at Cruise Moab :flipoff2:
You can replace the pump O-Rings and piston rings for almost nothing. The pump will be like brand new.
 
Back
Top Bottom